7.074.330 Drilling and milling...
7.075.790 Drilling and milling...
9.512.214 Drilling and milling...
9.845.288 Drilling and milling...
7.030.468 Tool holder, straigh...
7.040.804 Rectangular transver...
7.074.488 Tool holder, straigh...
7.075.034 Cut-off tool holder;...
7.075.265 Cut-off tool holder,...
7.171.071 Blanking plug...
3.200.910 Drilling and milling...
7.075.125 2-spindle cross dril...
7.172.312 Drilling and milling...
2.700.030 Drilling and milling...
541-78-00 , Thread whirling unit...
7.070.265 Drilling and milling...
7.072.701 Slotting unit Ø45xÃ...
7.074.888 2-Spindle front dril...
7.077.626 Drilling and milling...
7.077.710 Spindle unit for sid...
7.077.825 Drilling and milling...
7.170.320 Drilling and milling...
7.170.890 Device for gear mill...
9.047.111 Tapping head, angula...
1512-0911 Straight Shank Inter...
431-13-00 , Drill sleeve ER20; s...
7.030.455 Tool holder, straigh...
7.040.870 Tool holder, angular...
7.077.428 Test device...
7.077.515 Tool holder, angular...
7.077.594 Tool holder, angular...
2509-0975 PRECI-FLEX® Adapte...
9.060.046 Grinding wheel unit,...
9.406.236 Drilling and milling...
9.505.264 Drilling and milling...
106.105.000 Boring bar holder, s...
214.015.244 Boring bar holder DI...
223.060.250 Tool holder for carb...
7.040.104 Boring bar holder, s...
7.050.000 Cut-off tool holder,...
2003-0097 PRECI-FLEX® Adapte...
3206-0163 PRECI-FLEX® Adapte...
5320-0935 PSC Adapter 50
Groov...
6331-0863 PSC Tool Base 63
Bor...
Drilling and milling head angular, left hand collet chuck, ER50A, PRECI-FLEX®, CC external and central coolant supply Part Number: 7.074.330 Also Available 34 Adapter fits on 9 Machines |
Drilling and milling head straight, angular adjustable adjustable alignment pin collet chuck, ER20A, PRECI-FLEX®, CC, external coolant supply Part Number: 7.075.790 Also Available 55 Adapter fits on 2 Machines |
Drilling and milling head angular, double sided collet chuck, ER25A, PRECI-FLEX®, external coolant supply Part Number: 9.512.214 Also Available 89 Adapter fits on 2 Machines |
Drilling and milling head angular, right hand, short collet chuck, ER40A, PRECI-FLEX® external and central coolant supply Part Number: 9.845.288 Also Available 78 Adapter fits on Traub TNA500/600/700 (50) |
Tool holder straight, multiple rectangular lengthwise, external coolant supply Part Number: 7.030.468 fits on Daewoo P230 (VDI30) |
Rectangular transverse tool holder overhead,left hand short, Type B4 DIN 69880-B4-40x25x44, 70bar Part Number: 7.040.804 fits on 25 Machines |
Tool holder straight, right hand offset rectangular transverse, external coolant supply Part Number: 7.074.488 fits on 4 Machines |
Cut-off tool holder; shank: 16x16mm; with coolant supply (external)
Part Number: 7.075.034 fits on 4 Machines |
Cut-off tool holder direction of rotation M3 external and central coolant supply Tool height H=32 Part Number: 7.075.265 fits on 7 Machines |
Blanking plug Part Number: 7.171.071 fits on Okuma Multus U3000/U4000 |
Drilling and milling head angular, right hand collet chuck, ER25A, PRECI-FLEX®, external coolant supply Part Number: 3.200.910 Also Available 89 Adapter fits on Traub TNX65/42 (30) |
2-spindle cross drilling-/milling unit PRECI-FLEX® ER20; 12000 1/min; with coolant supply (internal)
Part Number: 7.075.125 Also Available 55 Adapter fits on 2 Machines |
Drilling and milling head straight, offset collet chuck, ER20A, PRECI-FLEX®, CC external coolant supply Part Number: 7.172.312 Also Available 55 Adapter fits on 6 Machines |
Drilling and milling head straight, height adjustable in Y collet chuck, ER16, external coolant supply Part Number: 2.700.030 fits on 4 Machines |
Thread whirling unit; ajustable (0°±10°)
Part Number: 541-78-00 , fits on 2 Machines |
Drilling and milling head angular, short collet chuck, ER32, external coolant supply Part Number: 7.070.265 fits on Biglia B501/B1000 |
Slotting unit Ø45xØ10mm for backworking (i=1,8:1)
Part Number: 7.072.701 fits on 7 Machines |
2-Spindle front drilling unit angular adjustable collet chuck, ER11A Part Number: 7.074.888 fits on Hyundai WIA SKT20A/32A |
Drilling and milling head straight quick change, EPPINGER PSC 50, CC external and central coolant supply Part Number: 7.077.626 fits on 31 Machines |
Spindle unit for side milling cutters angular, left-right hand chuck for cutter arbor 32, external coolant supply Part Number: 7.077.710 fits on 26 Machines |
Drilling and milling head straight, right hand offset adjustable alignment pin quick change, EPPINGER PSC 40 external coolant supply Part Number: 7.077.825 fits on 4 Machines |
Drilling and milling head angular, right hand adjustable alignment pin collet chuck, ER16AX, CC, external coolant supply Part Number: 7.170.320 fits on Mazak QT(C) (U) 200M (A,S,SY,Y) 12 [Bolt On] / QTS 200/250 M 6000 |
Device for gear milling
chuck for cutter arbor Ø16 angle adjustable ±20° Part Number: 7.170.890 fits on 4 Machines |
Tapping head angular, right hand, tension compensation PCM-collet chuck, ER20A, external coolant supply Part Number: 9.047.111 fits on Sauter 16fach Rev. Zahnrad |
Straight Shank Interface D20 DECOFLEX® 15 Part Number: 1512-0911 Also Available 181 Adapter fits on TSUGAMI B0126E/206E-II |
Drill sleeve ER20; shank: Ø32mm
Part Number: 431-13-00 , fits on 6 Machines |
Tool holder straight, left hand offset, overhead rectangular transverse, external coolant supply Part Number: 7.030.455 fits on Manurhin XL32 |
Tool holder angular, left, right hand quick change, EPPINGER PSC 40, LH, Trifix® external and central coolant supply Part Number: 7.040.870 fits on Sauter DIN5480 (40) W20x0.8x24 10000 |
Test device Part Number: 7.077.428 fits on 5 Machines |
Tool holder angular, multiple quick change, EPPINGER PSC 40, LH external and central coolant supply Part Number: 7.077.515 fits on 17 Machines |
Tool holder angular, straight quick change, EPPINGER PSC 50, RH external and central coolant supply Part Number: 7.077.594 fits on 12 Machines |
PRECI-FLEX® Adapter 25 Pre-machined Blank D50 Part Number: 2509-0975 |
Grinding wheel unit angular, left hand-right hand chuck for cutter arbor Ø20 external coolant supply Part Number: 9.060.046 fits on 2 Machines |
Drilling and milling head angular, left hand collet chuck, ER20, external coolant supply Part Number: 9.406.236 fits on 3 Machines |
Drilling and milling head angular, right hand, short collet chuck, ER25A, external coolant supply Part Number: 9.505.264 fits on 14 Machines |
Boring bar holder straight cylindrical chuck Ø25 Part Number: 106.105.000 fits on XXX XXX |
Boring bar holder DIN 69880 Type E2 for inch tools external and central coolant supply Part Number: 214.015.244 fits on 7 Machines |
Tool holder for carbides indexable drill Type E1 for inch tools DIN 69880, central coolant supply Part Number: 223.060.250 fits on 22 Machines |
Boring bar holder straight cylindrical chuck Ø16, central coolant supply Part Number: 7.040.104 fits on XXX XXX |
Cut-off tool holder direction of rotation M4 external and central coolant supply Tool height H=32 Part Number: 7.050.000 fits on XXX XXX |
PRECI-FLEX® Adapter 20 Weldon short Standard DIN1835-B1/4" Part Number: 2003-0097 |
PRECI-FLEX® Adapter 32 Whistle Notch extended DIN1835-E1/4" Part Number: 3206-0163 |
PSC Adapter 50
Grooving Holder straight, left hand, H26 Part Number: 5320-0935 |
PSC Tool Base 63
Boring Bar
PSC63-SDQCR-27180-11
Part Number: 6331-0863 |