3.200.682 Drilling and milling...
7.072.565 Drilling and milling...
222.060.220 Tool holder for carb...
7.040.302 Blanking plug...
7.074.570 Tool holder, angular...
2109-0609 DECOFLEX® Adapter 2...
2.700.240 Milling head, angula...
3.200.475 Drilling and milling...
3.200.620 Drilling and milling...
7.170.942 Milling unit for bac...
9.009.048 Drilling and milling...
9.661.225 Spindle unit for sid...
7.030.024 Boring bar holder, s...
7.074.008 Sleeve holder for de...
7.077.244 Tool holder, angular...
7.078.210 Tool holder, angular...
3.200.165 Drilling and milling...
4.200.906 Drilling and milling...
5.200.124 Drilling and milling...
9.415.xxx Drilling and milling...
9.465.131 Drilling and milling...
7.030.285 Boring bar holder, a...
7.040.337 Tool holder, angular...
Drilling and milling head angular, right hand collet chuck, ER25A, PRECI-FLEX®, external coolant supply Part Number: 3.200.682 Also Available 89 Adapter fits on 2 Machines |
Drilling and milling head straight collet chuck, ER20A, PRECI-FLEX® external coolant supply Part Number: 7.072.565 Also Available 55 Adapter fits on 7 Machines |
Tool holder for carbides indexable drill Type E1 DIN 69880 E1-30x40, central coolant supply Part Number: 222.060.220 fits on 48 Machines |
Blanking plug Part Number: 7.040.302 fits on Murata-Muratec Muratec MT25 |
Tool holder angular, left hand-right hand rectangular transverse, external coolant supply Part Number: 7.074.570 fits on Okuma LB2000EX-L/LW |
DECOFLEX® Adapter 20
Pre-machined Blank 20x16 Part Number: 2109-0609 |
Milling head angular 10°, left hand-right hand cylindrical chuck Ø16, external coolant supply Part Number: 2.700.240 fits on 2 Machines |
Drilling and milling head straight collet chuck, ER25A, external coolant supply Part Number: 3.200.475 fits on Daewoo P230 (VDI30) |
Drilling and milling head straight, height adjustable in Y collet chuck, ER25A, external coolant supply Part Number: 3.200.620 fits on Duplomatic DIN 1809 (30) PIN40 |
Milling unit for backworking for ph HORN interface M117
Part Number: 7.170.942 fits on 15 Machines |
Drilling and milling head angular, right hand collet chuck, ER11, external coolant supply Part Number: 9.009.048 fits on 2 Machines |
Spindle unit for side milling cutters angular, right hand chuck for cutter arbor Ø16, external coolant supply Part Number: 9.661.225 fits on Biglia B501/501M (VDI40) |
Boring bar holder straight, left hand offset cylindrical chuck Ø32, external coolant supply Part Number: 7.030.024 fits on 2 Machines |
Sleeve holder for deep drilling Ø32mm
Part Number: 7.074.008 fits on 4 Machines |
Tool holder angular quick change, EPPINGER PSC 40, LH external and central coolant supply Part Number: 7.077.244 fits on 24 Machines |
Tool holder angular adjustable alignment pin quick change, EPPINGER PSC 50, RH external and central coolant supply Part Number: 7.078.210 fits on 3 Machines |
Drilling and milling head straight, right hand offset collet chuck, ER25A, external coolant supply Part Number: 3.200.165 fits on Sauter DIN5482 B15x12 (30) |
Drilling and milling head angular, right hand collet chuck, ER32A, external coolant supply Part Number: 4.200.906 fits on 9 Machines |
Drilling and milling head straight collet chuck, ER40, external coolant supply Part Number: 5.200.124 fits on Pittler DIN5481 B21x24 (50) |
Drilling and milling head angular, right hand, short collet chuck, ER8, external coolant supply Part Number: 9.415.xxx fits on XXX XXX |
Drilling and milling head angular, right hand collet chuck, ER20, external and central coolant supply Part Number: 9.465.131 fits on Okuma LT200-M/LT10-M |
Boring bar holder angular, right hand, short cylindrical chuck Ø19,05 (3/4"), external and central coolant supply Part Number: 7.030.285 fits on DMG MORI MF Sprint 65 (alt) |
Tool holder angular, left hand-right hand, short morse taper holder MK2, external and central coolant supply Part Number: 7.040.337 fits on Okuma LT300-M/LT15-M/LB300-MYW (neu) |