3.201.168 Drilling and milling...
3.201.174 Drilling and milling...
7.072.195 Drilling and milling...
7.072.352 Drilling and milling...
7.072.650 Drilling and milling...
7.075.960 Drilling and milling...
7.076.340 Drilling and milling...
7.076.565 Drilling and milling...
7.076.887 Drilling and milling...
7.077.264 Drilling and milling...
7.077.580 Drilling and milling...
7.078.540 Drilling and milling...
7.170.265 Drilling and milling...
7.170.410 Drilling and milling...
7.171.506 Drilling and milling...
7.172.655 Drilling and milling...
7.172.680 Drilling and milling...
7.172.882 Drilling and milling...
8.820.299 Drilling and milling...
8.822.300 Drilling and milling...
431-51-00 2-spindle cross dril...
7.173.088 Cross drilling-/mill...
1088790 Cut-off tool holder,...
200.015.150 Boring bar holder DI...
211.650.160 Cut-off tool holder,...
213.015.154 Boring bar holder DI...
213.640.220 Cut-off tool holder,...
215.500.001 Blanking plug type Z...
221.125.150 Rectangular lengthwi...
223.040.220 Collet chuck DIN 698...
7.040.455 Boring bar holder, s...
7.040.496 Boring bar holder, a...
7.071.266 Boring bar holder, a...
7.071.782 Tool holder, straigh...
7.071.796 Tool holder
rectangu...
7.074.574 Boring bar holder, a...
7.075.522 Blanking plug...
7.077.836 Tool holder, straigh...
7.078.745 Tool holder, angular...
7.079.480 Blanking plug...
7.173.134 Boring bar holder, a...
7.174.745 Tool holder, straigh...
1501-0646 DECOFLEX® Adapter 1...
1522-0658 DECOFLEX® Tool Base...
1522-0687 DECOFLEX® Tool Base...
1533-0976 DECOFLEX® Adapter 1...
2002-0549 PRECI-FLEX® Adapte...
2108-0654 DECOFLEX® Tool Base...
6331-0854 PSC Tool Base 63
Bor...
7.076.942 PRECI-FLEX-T holder ...
3.201.210 Drilling and milling...
4.201.250 Drilling and milling...
4.201.620 Drilling and milling...
7.071.645 Drilling and milling...
7.073.520 Drilling and milling...
7.078.835 Drilling and milling...
7.171.705 Drilling and milling...
7.172.730 Drilling and milling...
7.172.750 Drilling and milling...
221-53-00 , Front tapping unit E...
3.200.000 Spindle unit for sid...
3.200.430 Milling head, angula...
3.200.443 Drilling and milling...
451-71-00 , Polygon machining-/t...
5.200.053 Drilling and milling...
7.072.205 Device for gear mill...
7.072.941 2-spindle double fro...
7.078.185 Drilling and milling...
7.078.626 Drilling and milling...
7.079.805 Spindle unit for sid...
7.170.882 Thread whirling unit...
7.172.433 Milling head, angula...
8.213.165 Drilling and milling...
8.214.165 Drilling and milling...
8.406.071 Drilling and milling...
8.408.220 Milling head, straig...
8.424.126 Drilling and milling...
8.561.233 Drilling and milling...
8.626.112 Drilling and milling...
9.045.206 Drilling and milling...
9.047.111 Tapping head, angula...
9.061.049 Spindle unit for sid...
9.474.243 Drilling and milling...
9.646.086 Drilling and milling...
9.658.097 Drilling and milling...
9.662.086 Drilling and milling...
9.686.215 Milling head, angula...
9.688.087 Milling head, angula...
951235 Drilling and milling...
1511-0641 Tool Machine Interfa...
204.077.150 Pre-machined blank (...
221-10-00 Sleeve holder Ø22mm...
241.102.150 Rectangular transver...
431-02-00 2-station tool holde...
451-14-00 , Sleeve holder for de...
581-72-00 , Boring sleeve Ø6mm ...
671-23-00 , Drill sleeve ER16; s...
671-44-00 , Boring sleeve Ø12mm...
7.030.198 Boring bar holder, a...
7.030.535 Boring bar holder, a...
7.040.199 Tool holder, angular...
7.040.775 Tool holder, straigh...
7.040.818 Cut-off tool holder,...
7.040.874 Boring bar holder, a...
7.071.652 Drill holder, angula...
7.072.014 Tool holder, angular...
7.072.136 Blanking plug...
7.076.978 Tool holder, straigh...
7.077.120 Tool holder, angular...
7.077.220 Tool holder, angular...
7.077.430 Test device...
7.077.432 Test device...
7.077.585 Tool holder, angular...
7.078.942 Adapter, angular, le...
7.172.920 Boring bar holder, a...
781-01-00 , Tool holder; shank: ...
1507-0708 DECOFLEX® Adapter ...
2517-1151 PRECI-FLEX® Adapte...
3203-0343 PRECI-FLEX® Adapte...
3205-0049 PRECI-FLEX® Adapte...
4008-0994 PRECI-FLEX® Adapte...
4009-0243 PRECI-FLEX® Adapte...
7.071.845 Drilling and milling...
8.820.173 Drilling and milling...
3.200.168 Tapping head, straig...
3.200.340 Drilling and milling...
3.200.670 Drilling and milling...
3.200.714 Drilling and milling...
3.200.730 Drilling and milling...
323756 Tapping head, straig...
4.200.171 Drilling and milling...
4.200.645 Drilling and milling...
4100.00277 Drilling and milling...
4100.00319 Drilling and milling...
5.200.007 Drilling and milling...
7.070.982 Drilling and milling...
7.072.660 Drilling and milling...
7.074.420 Slotting unit for sa...
7.076.525 Drilling and milling...
7.077.537 Drilling and milling...
7.172.300 3-Station drilling a...
7.172.535 Gear Box Unit S21...
8.002.049 Drilling and milling...
8.003.046 Drilling and milling...
8.003.057 Drilling and milling...
8.405.068 Drilling and milling...
8.609.004 Drilling and milling...
8.611.013 Tapping head, straig...
8.618.054 Milling head, straig...
8.760.004 Drilling and milling...
8.803.067 Drilling and milling...
8.821.300 Drilling and milling...
9.002.xxx Drilling and milling...
9.006.035 Drilling and milling...
9.042.xxx Drilling and milling...
9.061.051 Spindle unit for sid...
9.201.156 Drilling and milling...
9.204.156 Drilling and milling...
9.425.016 Milling head, angula...
9.441.021 Drilling and milling...
9.472.175 Drilling and milling...
9.504.278 Drilling and milling...
9.509.274 Drilling and milling...
9.607.005 Drilling and milling...
9.607.013 Drilling and milling...
9.611.015 Drilling and milling...
9.613.043 Drilling and milling...
9.629.002 Tapping head, angula...
9.633.008 Tapping head, angula...
9.634.009 Tapping head, angula...
9.657.182 Drilling and milling...
9.669.115 Tapping head, angula...
101-43-00 , 6-station sleeve hol...
211.675.220 Cut-off tool holder,...
212.135.250 Rectangular tool hol...
231.100.250 Rectangular transver...
241.100.170 Tool holder, angular...
4100.00211 Adapter, angular, le...
7.025.037 Cut-off tool holder,...
7.030.122 Boring bar holder, s...
7.030.146 Boring bar holder, s...
7.030.157 Pre-machined blank (...
7.030.217 Boring bar holder, a...
7.030.553 Boring bar holder, a...
7.040.032 Cut-off tool holder,...
7.040.041 Tool holder, straigh...
7.040.114 Boring bar holder, s...
7.040.208 Tool holder, multipl...
7.040.535 Boring bar holder, a...
7.050.052 Tool holder, straigh...
7.070.300 Boring bar holder, l...
7.070.442 Tool holder, straigh...
7.070.461 Tool holder, angular...
7.071.041 Tool holder, straigh...
7.071.047 Boring bar holder, s...
7.071.093 Tool holder, straigh...
7.078.954 Boring bar holder, a...
7.171.065 2-Station tool holde...
2005-0149 PRECI-FLEX® Adapte...
2517-1129 PRECI-FLEX® Adapte...
3204-0399 PRECI-FLEX® Adapte...
3204-0400 PRECI-FLEX® Adapte...
3206-0166 PRECI-FLEX® Adapte...
4321-0732 PSC Tool Base 40
Tur...
4330-0829 PSC Tool Base 40
Bor...
5321-0776 PSC Tool Base 50
Tur...
6330-0849 PSC Tool Base 63
Bor...
6334-0940 PSC Tool Base 63
Bor...
Drilling and milling head straight, angular adjustable collet chuck, ER20A, PRECI-FLEX®, Trifix® external coolant supply Part Number: 3.201.168 Also Available 55 Adapter fits on Sauter DIN5480 (30) W16x0.8x18 12000 |
Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX® external coolant supply Part Number: 3.201.174 Also Available 88 Adapter fits on 2 Machines |
Drilling and milling head straight collet chuck, ER40A, PRECI-FLEX®, external coolant supply Part Number: 7.072.195 Also Available 78 Adapter fits on 3 Machines |
Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX® external coolant supply Part Number: 7.072.352 Also Available 88 Adapter fits on ROMI E280 |
Drilling and milling head angular, left hand - right hand collet chuck, ER20A, PRECI-FLEX® external and central coolant supply Part Number: 7.072.650 Also Available 55 Adapter fits on 6 Machines |
Drilling and milling head straight collet chuck, ER32A, PRECI-FLEX®, CC central coolant supply Part Number: 7.075.960 Also Available 103 Adapter fits on 2 Machines |
Drilling and milling head straight collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 7.076.340 Also Available 103 Adapter fits on Takisawa EX-308/310/508/510 |
Drilling and milling head angular, right hand, short collet chuck, ER32A, PRECI-FLEX®, CC external coolant supply Part Number: 7.076.565 Also Available 103 Adapter fits on 7 Machines |
Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX®, CC external coolant supply Part Number: 7.076.887 Also Available 88 Adapter fits on 8 Machines |
Drilling and milling head angular, left hand-right hand, short collet chuck, ER20A, PRECI-FLEX®, CC external and central coolant supply Part Number: 7.077.264 Also Available 55 Adapter fits on 2 Machines |
Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX®, CC external and central coolant supply Part Number: 7.077.580 Also Available 103 Adapter fits on 2 Machines |
Drilling and milling head angular, left hand collet chuck, ER25A, PRECI-FLEX® external and central coolant supply Part Number: 7.078.540 Also Available 88 Adapter fits on Hardinge Quest 65, SR + RS Reihe (ESA-Rev.) |
Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX®, external and central coolant supply Part Number: 7.170.265 Also Available 103 Adapter fits on Takisawa EX-308/310/508/510 |
Drilling and milling head angular, double sided collet chuck, ER25A, PRECI-FLEX®, external coolant supply Part Number: 7.170.410 Also Available 88 Adapter fits on Murata-Muratec Muratec MT12/200 |
Drilling and milling head straight, angular adjustable collet chuck, ER20A, PRECI-FLEX®, CC external coolant supply Part Number: 7.171.506 Also Available 55 Adapter fits on 53 Machines |
Drilling and milling head straight collet chuck, ER32A, PRECI-FLEX®, CC, high pressure central coolant supply Part Number: 7.172.655 Also Available 103 Adapter fits on 2 Machines |
Drilling and milling head straight collet chuck, ER32A, PRECI-FLEX®, CC, high pressure external and central coolant supply Part Number: 7.172.680 Also Available 103 Adapter fits on 46 Machines |
Drilling and milling head angular, double sided collet chuck, ER32A, PRECI-FLEX®, CC, external coolant supply Part Number: 7.172.882 Also Available 103 Adapter fits on 3 Machines |
Drilling and milling head straight collet chuck, ER40A, PRECI-FLEX®, external coolant supply Part Number: 8.820.299 Also Available 78 Adapter fits on 5 Machines |
Drilling and milling head straight collet chuck, ER40A, PRECI-FLEX® external and central coolant supply Part Number: 8.822.300 Also Available 78 Adapter fits on 6 Machines |
2-spindle cross drilling-/milling unit ER16
Part Number: 431-51-00 fits on 5 Machines |
Cross drilling-/milling unit DECOFLEX®15 with coolant supply (external or internal)
Part Number: 7.173.088 Also Available 181 Adapter fits on 4 Machines |
Cut-off tool holder direction of rotation universal external and central coolant supply Tool height H=32 Part Number: 1088790 fits on 3 Machines |
Boring bar holder DIN 69880-E2-16x8 Type E2 external and central coolant supply Part Number: 200.015.150 fits on 3 Machines |
Cut-off tool holder direction of rotation M4 external coolant supply Tool height H=26 Part Number: 211.650.160 fits on 18 Machines |
Boring bar holder DIN 69880-E2-40x20 Type E2 external and central coolant supply Part Number: 213.015.154 fits on 64 Machines |
Cut-off tool holder direction of rotation M3 external and central coolant supply Tool height H=32 Part Number: 213.640.220 fits on 15 Machines |
Blanking plug type Z2
DIN 69880-Z2-60 (plastic) Part Number: 215.500.001 fits on 6 Machines |
Rectangular lengthwise tool holder left hand, Type C2 DIN 69880-C2-20x16 Part Number: 221.125.150 fits on 4 Machines |
Collet chuck DIN 69880-E4-40x25 Type E4 for collets DIN 6499 Schaublin Part Number: 223.040.220 fits on 64 Machines |
Boring bar holder straight, left hand offset cylindrical chuck Ø40, external and central coolant supply Part Number: 7.040.455 fits on Okuma LB250T |
Boring bar holder angular, right hand, short cylindrical chuck Ø40, external and central coolant supply Part Number: 7.040.496 fits on Murata-Muratec Muratec MT20 |
Boring bar holder angular, left hand cylindrical chuck Ø50, external coolant supply Part Number: 7.071.266 fits on 2 Machines |
Tool holder straight, left hand offset rectangular transverse, external coolant supply Part Number: 7.071.782 fits on 2 Machines |
Tool holder
rectangular lengthwise external coolant supply Part Number: 7.071.796 fits on Hardinge Quest 65, SR + RS Reihe (ESA-Rev.) |
Boring bar holder angular, left hand - right hand cylindrical chuck Ø40 external and central coolant supply Part Number: 7.074.574 fits on Okuma LB2000EX-L/LW |
Blanking plug Part Number: 7.075.522 fits on Okuma LT2000EX (V16) |
Tool holder straight, left hand offset rectangular transverse, external coolant supply Part Number: 7.077.836 fits on SMEC PL 800VM (R/L) (BMT75) |
Tool holder angular, right hand rectangular transverse, external coolant supply Part Number: 7.078.745 fits on Murata-Muratec Muratec MW120 (EX) 8fach/MS60 8fach |
Blanking plug Part Number: 7.079.480 fits on 49 Machines |
Boring bar holder angular, left hand-right hand, double cylindrical chuck Ø32, external and central coolant supply Part Number: 7.173.134 fits on 2 Machines |
Tool holder straight, multiple with additional fixture at 15° rectangular transverse, external coolant supply Part Number: 7.174.745 fits on 10 Machines |
DECOFLEX® Adapter 15
Collet Chuck DIN6499 ER16-M (426E)
with Turnlock System Part Number: 1501-0646 |
DECOFLEX® Tool Base 15
Turning Holder
SVUCR DF15 X11-47-90 Part Number: 1522-0658 |
DECOFLEX® Tool Base 15
Turning Holder
SDGCR DF15 X11-47-00 Part Number: 1522-0687 |
DECOFLEX® Adapter 15
Cylindrical chuck D4
DIETERLE MFE-04 DF15-15.4-00 Part Number: 1533-0976 |
PRECI-FLEX® Adapter 20 Collet Chuck extended DIN6499 ER16-M (426E) Part Number: 2002-0549 |
DECOFLEX® Tool Base 20
Boring Bar D12
L=75 L2=40.5 - 00 Part Number: 2108-0654 |
PSC Tool Base 63
Boring Bar
PSC63-SCLCR-27140-12
Part Number: 6331-0854 |
PRECI-FLEX-T holder into PRECI-FLEX® Adapter 25 Part Number: 7.076.942 Also Available 88 Adapter |
Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX® external coolant supply Part Number: 3.201.210 Also Available 88 Adapter fits on 11 Machines |
Drilling and milling head angular, left hand-right hand, short collet chuck, ER20A, PRECI-FLEX® external coolant supply Part Number: 4.201.250 Also Available 55 Adapter fits on Okuma LT300-M/LT15-M/LB300-MYW (neu) |
Drilling and milling head angular 45°, left hand collet chuck, ER32A, PRECI-FLEX®, Trifix® external and central coolant supply Part Number: 4.201.620 Also Available 103 Adapter fits on DMG MORI CTX beta 500/800/1250 (Sternrev.) |
Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX® external coolant supply Part Number: 7.071.645 Also Available 88 Adapter fits on 3 Machines |
Drilling and milling head angular, double collet chuck, ER32A, PRECI-FLEX® external and central coolant supply Part Number: 7.073.520 Also Available 103 Adapter fits on 3 Machines |
Drilling and milling head straight, right hand offset adjustable alignment pin collet chuck, ER32A, PRECI-FLEX® external coolant supply Part Number: 7.078.835 Also Available 103 Adapter fits on 3 Machines |
Drilling and milling head angular, left hand - right hand, short collet chuck, ER25A, PRECI-FLEX®, CC external and central coolant supply Part Number: 7.171.705 Also Available 88 Adapter fits on Okuma LT2000EX (V12) |
Drilling and milling head straight, double collet chuck, ER20A, PRECI-FLEX® external coolant supply Part Number: 7.172.730 Also Available 55 Adapter fits on 5 Machines |
Drilling and milling head angular, right hand, short collet chuck, ER32A, PRECI-FLEX®, external and central coolant supply Part Number: 7.172.750 Also Available 103 Adapter fits on Mazak Hyper Quadrex 100/150 MSY / HQR 200/250 (16 Stationen) |
Front tapping unit ER11
Part Number: 221-53-00 , fits on 3 Machines |
Spindle unit for side milling cutters
chuck for cutter arbor Ø22 external coolant supply Part Number: 3.200.000 fits on DMG MORI GAC42-65 |
Milling head angular -Y, right hand collet chuck, ER25A, external coolant supply Part Number: 3.200.430 fits on Daewoo Puma 200 |
Drilling and milling head straight, right hand offset, angular adjustable collet chuck, ER20A, external coolant supply Part Number: 3.200.443 fits on Hardinge TT65 |
Polygon machining-/thread milling unit Ø70xØ16mm (±30°)
Part Number: 451-71-00 , fits on 4 Machines |
Drilling and milling head angular, left hand, short quick change, PSC 40, external coolant supply Part Number: 5.200.053 fits on Duplomatic DIN 1809 (50) |
Device for gear milling
chuck for cutter arbor Ø8 Ø10, Ø12, Ø13, Ø16, Ø22, external coolant supply Part Number: 7.072.205 fits on Hardinge Quest 65, SR + RS Reihe (ESA-Rev.) |
2-spindle double front drilling-/milling unit ER16 for front- and backworking
Part Number: 7.072.941 fits on Star SV-32 |
Drilling and milling head straight, angular, left hand - right hand quick change, EPPINGER PSC 32, CC external coolant supply Part Number: 7.078.185 fits on 8 Machines |
Drilling and milling head angular, left hand quick change, EPPINGER PSC 32, CC external coolant supply Part Number: 7.078.626 fits on 17 Machines |
Spindle unit for side milling cutters straight chuck for cutter arbor Ø13 Part Number: 7.079.805 fits on TSUGAMI H205/206E |
Thread whirling unit; adjustable (±24°); SCHWANOG type no.291723; with coolant supply (external)
Part Number: 7.170.882 fits on 2 Machines |
Milling head angular 45°, left hand-right hand collet chuck, ER16A, external and central coolant Part Number: 7.172.433 fits on Okuma LT2000EX (V16) |
Drilling and milling head straight, right hand offset collet chuck, ER16, external coolant supply Part Number: 8.213.165 fits on 4 Machines |
Drilling and milling head straight, left hand offset collet chuck, ER16A, external coolant supply Part Number: 8.214.165 fits on 2 Machines |
Drilling and milling head straight collet chuck, ER25 , external and central coolant supply Part Number: 8.406.071 fits on Okuma LR10-M |
Milling head straight, short chuck for cutter arbor Ø16, external coolant supply Part Number: 8.408.220 fits on Manurhin XL32 |
Drilling and milling head straight, left hand offset collet chuck, ER16M external coolant supply Part Number: 8.424.126 fits on 3 Machines |
Drilling and milling head angular adjustable, right hand collet chuck, ER16A, external coolant supply Part Number: 8.561.233 fits on Daewoo P230 (VDI30) |
Drilling and milling head straight, right hand offset collet chuck, ER20A, external coolant supply Part Number: 8.626.112 fits on Duplomatic DIN 1809 (40) PIN63 |
Drilling and milling head angular, right hand collet chuck, ER20A, external coolant supply Part Number: 9.045.206 fits on 3 Machines |
Tapping head angular, right hand, tension compensation PCM-collet chuck, ER20A, external coolant supply Part Number: 9.047.111 fits on Sauter 16fach Rev. Zahnrad |
Spindle unit for side milling cutters angular, right hand chuck for cutter arbor Ø16, external coolant supply Part Number: 9.061.049 fits on 2 Machines |
Drilling and milling head angular, double sided collet chuck, ER25A, external coolant supply Part Number: 9.474.243 fits on 4 Machines |
Drilling and milling head angular, left hand, short collet chuck, ER32A, external coolant supply Part Number: 9.646.086 fits on 2 Machines |
Drilling and milling head angular, left hand collet chuck, ER32A, coolant external and central coolant supply Part Number: 9.658.097 fits on Okuma LT25-M |
Drilling and milling head angular, left hand, short collet chuck, ER32A, external and central coolant supply Part Number: 9.662.086 fits on 2 Machines |
Milling head angular -Y, left hand collet chuck, ER25A, external coolant supply Part Number: 9.686.215 fits on 2 Machines |
Milling head angular -Y, left hand collet chuck, ER25A, external coolant supply Part Number: 9.688.087 fits on 3 Machines |
Drilling and milling head angular, left hand - right hand, short cylindrical chuck DIN 1835, Ø10H5, external and central coolant supply Part Number: 951235 fits on Traub TNC42/65 |
Tool Machine Interface ISO DIN69893 Fixed Adapter (HSK A/C-63) DECOFLEX® 15 Part Number: 1511-0641 Also Available 181 Adapter fits on 0 Machines |
Pre-machined blank (Tool holder for special design) Type A2 DIN 69880-A2-50x135 Part Number: 204.077.150 fits on XXX XXX |
Sleeve holder Ø22mm
Part Number: 221-10-00 fits on 3 Machines |
Rectangular transverse tool holder right hand, long, Type B5 DIN 69880-B5-20x16x30 Part Number: 241.102.150 fits on 10 Machines |
2-station tool holder; shank: 16x16mm
Part Number: 431-02-00 fits on 2 Machines |
Sleeve holder for deep drilling Ø22mm
Part Number: 451-14-00 , fits on Star SV-12 |
Boring sleeve Ø6mm for backworking
Part Number: 581-72-00 , fits on 3 Machines |
Drill sleeve ER16; shank: Ø22mm
Part Number: 671-23-00 , fits on 8 Machines |
Boring sleeve Ø12mm; shank: Ø22mm
Part Number: 671-44-00 , fits on 5 Machines |
Boring bar holder angular, left hand - right hand cylindrical chuck Ø25, external and central coolant supply Part Number: 7.030.198 fits on Okuma LT200-M/LT10-M |
Boring bar holder angular, left hand - right hand cylindrical chuck Ø32, external and central coolant supply Part Number: 7.030.535 fits on 2 Machines |
Tool holder angular, left, multiple, back turret operation rectangular transverse, external coolant supply Part Number: 7.040.199 fits on Okuma LB15-MW |
Tool holder straight, left hand offset quick change, Kennametal KM40, external and central coolant supply Part Number: 7.040.775 fits on Okuma LB300-MW |
Cut-off tool holder direction of rotation universal external and central coolant supply tool height H=26 Part Number: 7.040.818 fits on Okuma LT300-M/LT15-M/LB300-MYW (neu) |
Boring bar holder angular, right hand, short cylindrical chuck Ø40, external and central coolant supply Part Number: 7.040.874 fits on Murata-Muratec Muratec MT25 |
Drill holder angular, right hand collet chuck, ER16, external and central coolant supply Part Number: 7.071.652 fits on Citizen M12/M16 |
Tool holder angular, left hand-right hand rectangular transverse, external coolant supply Part Number: 7.072.014 fits on Citizen M12/M16 |
Blanking plug Part Number: 7.072.136 fits on Okuma LT200 (ESA-Rev.) |
Tool holder straight, multiple quick change, EPPINGER PSC 40, RH external and central coolant supply Part Number: 7.076.978 fits on 11 Machines |
Tool holder angular adjustable alignment pin quick change, EPPINGER PSC 40, RH external and central coolant supply Part Number: 7.077.120 fits on 4 Machines |
Tool holder angular, multiple adjustable alignment pin quick change, EPPINGER PSC 40, RH external and central coolant supply Part Number: 7.077.220 fits on 4 Machines |
Test device Part Number: 7.077.430 fits on 2 Machines |
Test device Part Number: 7.077.432 fits on 3 Machines |
Tool holder angular, straight quick change, EPPINGER PSC 32, LH external and central coolant supply Part Number: 7.077.585 fits on 19 Machines |
Adapter angular, left hand for VDI-shank Ø20 Part Number: 7.078.942 fits on 2 Machines |
Boring bar holder angular, left hand - right hand cylindrical chuck Ø12,7 (1/2"), external and central coolant supply Part Number: 7.172.920 fits on 2 Machines |
Tool holder; shank: 16x16mm
Part Number: 781-01-00 , fits on 5 Machines |
DECOFLEX® Adapter 15 Shell Mill Arbor D4,5 Part Number: 1507-0708 |
PRECI-FLEX® Adapter 25
ISCAR Multi-Master T05 L=50.5 Part Number: 2517-1151 |
PRECI-FLEX® Adapter 32 Weldon short Standard DIN1835-B20 with coolant channel Part Number: 3203-0343 |
PRECI-FLEX® Adapter 32 Whistle Notch short Standard DIN1835-E20 Part Number: 3205-0049 |
PRECI-FLEX® Adapter 40 Boring Bar Holder D19 Part Number: 4008-0994 |
PRECI-FLEX® Adapter 40 Pre-machined Blank D46 Part Number: 4009-0243 |
Drilling and milling head angular, left hand collet chuck, ER50A, PRECI-FLEX®, external coolant supply Part Number: 7.071.845 Also Available 34 Adapter fits on 2 Machines |
Drilling and milling head straight collet chuck, ER40A, PRECI-FLEX®, external coolant supply Part Number: 8.820.173 Also Available 78 Adapter fits on 4 Machines |
Tapping head straight, right hand offset, tension compensation PCM-collet chuck, ER25A, external coolant supply Part Number: 3.200.168 fits on Sauter DIN5482 B15x12 (30) |
Drilling and milling head straight, left hand offset, angular adjustable collet chuck, ER20A, external coolant supply Part Number: 3.200.340 fits on 4 Machines |
Drilling and milling head angular, left hand - right hand, short collet chuck, ER25A, external coolant supply Part Number: 3.200.670 fits on 2 Machines |
Drilling and milling head angular, left hand - right hand collet chuck, ER25A, external coolant supply Part Number: 3.200.714 fits on 6 Machines |
Drilling and milling head straight collet chuck, ER25A, external and central coolant supply Part Number: 3.200.730 fits on 10 Machines |
Tapping head straight, right hand offset, tension compensation collet chuck, ER20A, external coolant supply Part Number: 323756 fits on Traub TNA300 |
Drilling and milling head angular, left hand collet chuck, ER32, external coolant supply Part Number: 4.200.171 fits on Okuma LT300-M/LT15-M/LB300-MYW (neu) |
Drilling and milling head angular, double sided collet chuck, ER40, external coolant supply Part Number: 4.200.645 fits on 2 Machines |
Drilling and milling head straight, angular adjustable collet chuck, ER16A, external coolant supply Part Number: 4100.00277 fits on 3 Machines |
Drilling and milling head straight, angular adjustable collet chuck, ER20A, external coolant supply Part Number: 4100.00319 fits on 3 Machines |
Drilling and milling head angular, right hand collet chuck, ER32A, external coolant supply Part Number: 5.200.007 fits on Sauter DIN5482 B20x17 (50) |
Drilling and milling head straight, left hand offset collet chuck, ER25A, external coolant supply Part Number: 7.070.982 fits on 2 Machines |
Drilling and milling head angular, right hand quick change, CAT40, external and central coolant supply Part Number: 7.072.660 fits on 3 Machines |
Slotting unit for sawØ 45x10mm Part Number: 7.074.420 fits on DN Solutions (Doosan) PUMA ST20G |
Drilling and milling head straight collet chuck, ER25A, CC, external and central coolant supply Part Number: 7.076.525 fits on 3 Machines |
Drilling and milling head angular, left hand - right hand collet chuck, ER25A, CC external and central coolant supply Part Number: 7.077.537 fits on BMT BMT55 * |
3-Station drilling and milling head straight collet chuck, ER16 external coolant supply Part Number: 7.172.300 fits on Tornos SwissDECO |
Gear Box Unit S21 Part Number: 7.172.535 fits on Tornos SwissDECO |
Drilling and milling head straight, short collet chuck, NG10, external coolant supply Part Number: 8.002.049 fits on Sauter 16fach Rev. Zahnrad |
Drilling and milling head straight, short collet chuck, ER16, external coolant supply Part Number: 8.003.046 fits on Sauter DIN5480 W10x0,8x30 (20) |
Drilling and milling head straight, short collet chuck, ER16, external coolant supply Part Number: 8.003.057 fits on Duplomatic DIN 1809 (20) |
Drilling and milling head straight collet chuck, ER20 , external coolant supply Part Number: 8.405.068 fits on 11 Machines |
Drilling and milling head straight collet chuck, ER32A, external and central coolant supply Part Number: 8.609.004 fits on 4 Machines |
Tapping head straight, short, tension compensation collet chuck ER20, external coolant supply Part Number: 8.611.013 fits on 4 Machines |
Milling head straight, short chuck for cutter arbor Ø22, external coolant supply Part Number: 8.618.054 fits on 2 Machines |
Drilling and milling head angular adjustable, left hand collet chuck, ER20A, external coolant supply Part Number: 8.760.004 fits on Duplomatic DIN 1809 (40) PIN63 |
Drilling and milling head straight collet chuck, ER40 , external coolant supply Part Number: 8.803.067 fits on 3 Machines |
Drilling and milling head straight collet chuck, ER40A, external and central coolant supply Part Number: 8.821.300 fits on 5 Machines |
Drilling and milling head angular, left hand collet chuck, NG8, external coolant supply Part Number: 9.002.xxx fits on XXX XXX |
Drilling and milling head angular, left hand collet chuck, ER16, external coolant supply Part Number: 9.006.035 fits on Sauter DIN5480 W10x0,8x30 (20) |
Drilling and milling head angular, left hand collet chuck, ER16, external coolant supply Part Number: 9.042.xxx fits on XXX XXX |
Spindle unit for side milling cutters angular, right hand chuck for cutter arbor Ø16, external coolant supply Part Number: 9.061.051 fits on Boley BKN100 |
Drilling and milling head angular, right hand collet chuck, ER20, external coolant supply Part Number: 9.201.156 fits on 6 Machines |
Drilling and milling head angular, left hand collet chuck, ER20, external coolant supply Part Number: 9.204.156 fits on 4 Machines |
Milling head angular, right hand chuck for cutter arbor Ø16, external coolant supply Part Number: 9.425.016 fits on 2 Machines |
Drilling and milling head angular, right hand, short collet chuck, ER25, external coolant supply Part Number: 9.441.021 fits on 7 Machines |
Drilling and milling head angular, left hand collet chuck, ER25, external and central coolant supply, 70 bar Part Number: 9.472.175 fits on Hardinge TT65 |
Drilling and milling head angular, left hand, short collet chuck, ER25A, external coolant supply Part Number: 9.504.278 fits on 3 Machines |
Drilling and milling head angular, right hand, short collet chuck, ER25A, external and central coolant supply Part Number: 9.509.274 fits on 6 Machines |
Drilling and milling head angular, right hand collet chuck, ER25, external coolant supply Part Number: 9.607.005 fits on Traub TNS60 (40) |
Drilling and milling head angular, right hand collet chuck, ER25, external coolant supply Part Number: 9.607.013 fits on 2 Machines |
Drilling and milling head angular, right hand collet chuck, ER25, external coolant supply Part Number: 9.611.015 fits on 2 Machines |
Drilling and milling head angular, right hand, short collet chuck, NG16, external coolant supply Part Number: 9.613.043 fits on Nakamura-Tome TMC-30/35 |
Tapping head angular, right hand, tension compensation collet chuck, NG12, external coolant supply Part Number: 9.629.002 fits on 2 Machines |
Tapping head angular, right hand, short, tension compensation collet chuck, NG12, external coolant supply Part Number: 9.633.008 fits on Sauter DIN5482 B17x14 (40) |
Tapping head angular, left hand, short, tension compensation with collet chuck, ER20, external coolant supply Part Number: 9.634.009 fits on Sauter DIN5482 B17x14 (40) |
Drilling and milling head angular, right hand, short collet chuck, ER32, external coolant supply Part Number: 9.657.182 fits on 2 Machines |
Tapping head angular, right hand, short, tension compensation PCM-collet chuck, ER32, external coolant supply Part Number: 9.669.115 fits on 3 Machines |
6-station sleeve holder 4x Ø16mm and 2x Ø22mm
Part Number: 101-43-00 , fits on Star SL-7/10 |
Cut-off tool holder direction of rotation M3 external coolant supply Tool height H=26 Part Number: 211.675.220 fits on XXX XXX |
Rectangular tool holder with multiple seats Type D1 for inch tools external coolant supply Part Number: 212.135.250 fits on 2 Machines |
Rectangular transverse tool holder right hand, short, Type B1 for inch tools external coolant supply Part Number: 231.100.250 fits on 8 Machines |
Tool holder angular, right hand, back turret operation, height adjustable rectangular transverse, external coolant supply Part Number: 241.100.170 fits on Weiler DZ32 (CNC)/DZ42 (VDI20) |
Adapter angular, left hand for VDI-shank Ø30 Part Number: 4100.00211 fits on Schaublin CNC340 |
Cut-off tool holder direction of rotation universal external and central coolant supply tool height H=26 Part Number: 7.025.037 fits on 4 Machines |
Boring bar holder straight cylindrical chuck Ø22,225 (7/8"), central coolant supply Part Number: 7.030.122 fits on XXX XXX |
Boring bar holder straight, right hand offset back turret operation, multiple cylindrical chuck Ø16, external coolant supply Part Number: 7.030.146 fits on XXX XXX |
Pre-machined blank (Tool holder for special design) Type A1 DIN 69880 Part Number: 7.030.157 fits on XXX XXX |
Boring bar holder angular, left hand - right hand cylindrical chuck Ø31,75 (1 1/4"), external and central coolant supply Part Number: 7.030.217 fits on Okuma LT200-M/LT10-M |
Boring bar holder angular, left hand - right hand cylindrical chuck Ø32, external and central coolant supply Part Number: 7.030.553 fits on 0 Machines |
Cut-off tool holder direction of rotation M3 external and central coolant supply Tool height H=32 Part Number: 7.040.032 fits on XXX XXX |
Tool holder straight, right hand offset, overhead rectangular transverse, external coolant supply Part Number: 7.040.041 fits on XXX XXX |
Boring bar holder straight, left hand offset cylindrical chuck Ø40, external coolant supply Part Number: 7.040.114 fits on XXX XXX |
Tool holder multiple, back turret operation rectangular transverse and cylindrical chuck, external coolant supply Part Number: 7.040.208 fits on XXX XXX |
Boring bar holder angular, left hand, short cylindrical chuck Ø40, external and central coolant supply Part Number: 7.040.535 fits on Okuma LT25-M |
Tool holder straight, right hand offset rectangular transverse 31,75 (1 1/4"), external coolant supply Part Number: 7.050.052 fits on 3 Machines |
Boring bar holder lengthwise cylindrical chuck Ø25,4 (1"), central coolant supply Part Number: 7.070.300 fits on Manurhin Swing 20 |
Tool holder straight, right hand offset rectangular transverse, external coolant supply Part Number: 7.070.442 fits on Okuma MacTurn 50 (MAS-BT50) (Old Version) |
Tool holder angular, right hand rectangular transverse, external coolant supply Part Number: 7.070.461 fits on Okuma MacTurn 30 (MAS-BT40) |
Tool holder straight, right hand offset rectangular transverse, external coolant supply Part Number: 7.071.041 fits on Okuma MacTurn 50 (MAS-BT50) (High Pressure) |
Boring bar holder straight cylindrical chuck Ø50, external and central coolant supply Part Number: 7.071.047 fits on Okuma MacTurn 50 (MAS-BT50) (High Pressure) |
Tool holder straight, right hand offset rectangular transverse, external coolant supply Part Number: 7.071.093 fits on Okuma MacTurn 50 (MAS-BT50) (High Pressure) |
Boring bar holder angular, left hand adjustable alignment pin cylindrical chuck Ø38,1 (1 1/2") external and central coolant supply Part Number: 7.078.954 fits on 3 Machines |
2-Station tool holder 16x16
external coolant supply
Part Number: 7.171.065 fits on Tornos SwissDECO |
PRECI-FLEX® Adapter 20 Whistle Notch short Standard DIN1835-E1/2" Part Number: 2005-0149 |
PRECI-FLEX® Adapter 25
ISCAR Multi-Master T10 L=19.5 Part Number: 2517-1129 |
PRECI-FLEX® Adapter 32 Weldon extended DIN1835-B8 Part Number: 3204-0399 |
PRECI-FLEX® Adapter 32 Weldon extended DIN1835-B10 Part Number: 3204-0400 |
PRECI-FLEX® Adapter 32 Whistle Notch extended DIN1835-E5/8" Part Number: 3206-0166 |
PSC Tool Base 40
Turning Holder
PSC40-SDJCL-27050-11
Part Number: 4321-0732 |
PSC Tool Base 40
Boring Bar
PSC40-SDQCL-22110-11
Part Number: 4330-0829 |
PSC Tool Base 50
Turning Holder
PSC50-PDUNL-35060-15
Part Number: 5321-0776 |
PSC Tool Base 63
Boring Bar
PSC63-SCLCL-22160-12
Part Number: 6330-0849 |
PSC Tool Base 63
Boring Bar
PSC63-LGA-22125-16
Part Number: 6334-0940 |