Search Help For Tool Holder
Quick Search
Contact
Eppinger USA9930 E. 56th St.
Indianapolis, IN 46236
USA
800-397-9748 - Toll Free Phone
800-397-9739 - Toll Free Fax
352.588.4345 - Phone
352.588.4821 - Fax
RFQ@eppinger.com
www.eppinger.com
Shopping List
9.820.191 Drilling and milling...
201.010.150 Boring bar holder DI...
213.015.155 Boring bar holder DI...
221.120.150 Rectangular lengthwi...
223.048.220 Tool holder for carb...
231.010.163 Boring bar holder DI...
2.700.000 Drilling and milling...
2.700.014 Milling head, straig...
8.603.092 Drilling and milling...
8.605.018 Drilling and milling...
8.618.005 Milling head, straig...
9.411.034 Drilling and milling...
200.080.150 Pre-machined blank (...
222.390.220 Tap holder with tens...
227.035.220 Collet chuck DIN 698...
232.110.090 Collet chuck, straig...
7.030.360 Drill holder, angula...
7.070.422 Tool holder, angular...
4.200.552 Spindle unit for sid...
8.003.057 Drilling and milling...
8.011.048 Tapping head, straig...
8.214.xxx Drilling and milling...
8.402.025 Drilling and milling...
8.402.034 Drilling and milling...
8.403.126 Drilling and milling...
8.404.016 Drilling and milling...
8.410.025 Tapping head, straig...
8.421.068 Drilling and milling...
8.602.003 Drilling and milling...
8.610.004 Tapping head, straig...
8.615.105 Drilling and milling...
9.212.148 Grinding wheel unit,...
9.404.031 Drilling and milling...
9.407.016 Drilling and milling...
9.409.016 Drilling and milling...
9.462.169 Drilling and milling...
9.463.130 Drilling and milling...
9.463.131 Drilling and milling...
9.473.130 Drilling and milling...
211.655.220 Cut-off tool holder,...
212.670.220 Cut-off tool holder,...
242.201.220 Revolving center poi...
7.030.393 Boring bar holder, a...
7.070.455 Tool holder, angular...
7.070.552 Boring bar holder, a...
Your Shopping List
| Drilling and milling head angular, left hand, short collet chuck, ER40, external and central coolant supply Part Number: 9.820.191 fits on Okuma LB35II-M (bis Baujahr 05/2001) |
| Boring bar holder DIN 69880-E2-20x8 Type E2 external and central coolant supply Part Number: 201.010.150 fits on 20 Machines |
| Boring bar holder DIN 69880-E2-40x25 Type E2 external and central coolant supply Part Number: 213.015.155 fits on 65 Machines |
| Rectangular lengthwise tool holder overhead, left hand, Type 40 DIN 69880-40-20x16 Part Number: 221.120.150 fits on 5 Machines |
| Tool holder for carbides indexable drill Type E1 DIN 69880 E1-40x16, central coolant supply Part Number: 223.048.220 fits on 54 Machines |
| Boring bar holder DIN 69880-E2-20x16 Type E2 external and central coolant supply Part Number: 231.010.163 fits on 13 Machines |
| Drilling and milling head straight, left hand offset, angular adjustable collet chuck, ER11, external coolant supply Part Number: 2.700.000 fits on 4 Machines |
| Milling head straight, right hand-offset chuck for cutter arbor Ø16, external coolant supply Part Number: 2.700.014 fits on 3 Machines |
| Drilling and milling head straight,short collet chuck, ER25, external coolant supply Part Number: 8.603.092 fits on Baruffaldi TOERR 200/12 (40) |
| Drilling and milling head straight, short collet chuck, ER32A, external coolant supply Part Number: 8.605.018 fits on DMG MORI MD5IT (40) |
| Milling head straight, short chuck for cutter arbor Ø22, external coolant supply Part Number: 8.618.005 fits on Traub TNS60 (40) |
| Drilling and milling head angular, right hand collet chuck, ER20, external coolant supply Part Number: 9.411.034 fits on Danobat DT32 (VDI30) |
| Pre-machined blank (Tool holder for special design) Type A2 DIN 69880-A2-16x60 Part Number: 200.080.150 fits on XXX XXX |
| Tap holder with tension and traction compensation DIN 69880 Part Number: 222.390.220 fits on 8 Machines |
| Collet chuck DIN 69880-E4-25x32 Type E4 for collets DIN 6499 Schaublin Part Number: 227.035.220 fits on 5 Machines |
| Collet chuck straight, height adjustable ER25, for collets DIN 6499 Schaublin Part Number: 232.110.090 fits on 34 Machines |
| Drill holder angular, double sided collet chuck, ER25, external and central coolant supply Part Number: 7.030.360 fits on 2 Machines |
| Tool holder angular, right hand rectangular transverse, external coolant supply Part Number: 7.070.422 fits on Okuma MacTurn 50 (MAS-BT50) (Old Version) |
| Spindle unit for side milling cutters angular, left hand chuck for cutter arbor Ø22, external coolant supply Part Number: 4.200.552 fits on 2 Machines |
| Drilling and milling head straight, short collet chuck, ER16, external coolant supply Part Number: 8.003.057 fits on Duplomatic DIN 1809 (20) |
| Tapping head straight, short, tension compensation collet chuck, ER11, external coolant supply Part Number: 8.011.048 fits on 2 Machines |
| Drilling and milling head straight, left hand offset collet chuck, ER16A, external coolant supply Part Number: 8.214.xxx fits on XXX XXX |
| Drilling and milling head straight,short collet chuck, NG12, external coolant supply Part Number: 8.402.025 fits on 3 Machines |
| Drilling and milling head straight,short collet chuck, NG12, external coolant supply Part Number: 8.402.034 fits on Danobat DT32 (VDI30) |
| Drilling and milling head straight, short collet chuck, ER20, external coolant supply Part Number: 8.403.126 fits on 3 Machines |
| Drilling and milling head straight, short collet chuck, ER25A, external coolant supply Part Number: 8.404.016 fits on 4 Machines |
| Tapping head straight, short, tension compensation collet chuck, NG10, external coolant supply Part Number: 8.410.025 fits on 3 Machines |
| Drilling and milling head straight collet chuck, ER25 , external coolant supply Part Number: 8.421.068 fits on 12 Machines |
| Drilling and milling head straight, short collet chuck, NG16, external coolant supply Part Number: 8.602.003 fits on DMG MORI GDM200 (40) |
| Tapping head straight, short, tension compensation collet chuck, NG12, external coolant supply Part Number: 8.610.004 fits on 4 Machines |
| Drilling and milling head straight, left hand offset collet chuck, ER25, external coolant supply Part Number: 8.615.105 fits on 2 Machines |
| Grinding wheel unit angular, left hand-right hand chuck for cutter arbor Ø20 external coolant supply Part Number: 9.212.148 fits on Schaublin CNC330 |
| Drilling and milling head angular, left hand collet chuck, NG12, external coolant supply Part Number: 9.404.031 fits on 2 Machines |
| Drilling and milling head angular, right hand collet chuck, ER20, external coolant supply Part Number: 9.407.016 fits on 3 Machines |
| Drilling and milling head angular, right hand collet chuck, ER11, external coolant supply Part Number: 9.409.016 fits on 2 Machines |
| Drilling and milling head angular, left hand collet chuck, ER25, external coolant supply Part Number: 9.462.169 fits on Sauter 0.5.450.2 (30) DIN5480 W16x0,8x30x18 |
| Drilling and milling head angular, right hand collet chuck, ER25, external coolant supply Part Number: 9.463.130 fits on Okuma LT200-M/LT10-M |
| Drilling and milling head angular, right hand collet chuck, ER25, external coolant supply Part Number: 9.463.131 fits on Okuma LT200-M/LT10-M |
| Drilling and milling head angular, right hand collet chuck, ER25, external and central coolant supply Part Number: 9.473.130 fits on Okuma LT200-M/LT10-M |
| Cut-off tool holder direction of rotation M3 external coolant supply Tool height H=26 Part Number: 211.655.220 fits on 7 Machines |
| Cut-off tool holder direction of rotation M4 external and central coolant supply Tool height H=26 Part Number: 212.670.220 fits on XXX XXX |
| Revolving center point with inserts for centering inserts springiness, DIN 69880 Part Number: 242.201.220 fits on XXX XXX |
| Boring bar holder angular, right hand, short cylindrical chuck Ø31,75 (1 1/4"), external and central coolant supply Part Number: 7.030.393 fits on 2 Machines |
| Tool holder angular, right hand rectangular transverse, external coolant supply Part Number: 7.070.455 fits on Okuma MacTurn 30 (MAS-BT40) |
| Boring bar holder angular, left hand - right hand, short, multiple cylindrical chuck Ø19,05 (3/4") Part Number: 7.070.552 fits on Citizen M12/M16 |
Copyright 2025 EPPINGER USA | Home
| Who we are