Search Help For Tool Holder
Quick Search
Contact
Eppinger USA9930 E. 56th St.
Indianapolis, IN 46236
USA
800-397-9748 - Toll Free Phone
800-397-9739 - Toll Free Fax
352.588.4345 - Phone
352.588.4821 - Fax
RFQ@eppinger.com
www.eppinger.com
Shopping List
1088818 Drilling and milling...
3.200.673 Drilling and milling...
3.201.108 Drilling and milling...
4.200.778 Drilling and milling...
4.201.082 Drilling and milling...
4.201.163 Drilling and milling...
4.201.518 Drilling and milling...
7.072.605 Drilling and milling...
7.073.250 Drilling and milling...
7.073.365 Drilling and milling...
7.073.390 Drilling and milling...
7.077.261 Drilling and milling...
7.077.450 Drilling and milling...
7.078.432 Drilling and milling...
7.078.525 Drilling and milling...
7.079.595 Drilling and milling...
7.170.240 Drilling and milling...
7.172.572 Drilling and milling...
7.172.650 Drilling and milling...
8.822.285 Drilling and milling...
101-68-00 Cross drilling-/mill...
7.072.076 Drilling and milling...
7.074.780 Cross drilling-/mill...
7.076.185 2-spindle cross dril...
7.078.800 Cross drilling-/mill...
7.171.345 2-spindle cross dril...
7.171.929 Back drilling unit
D...
0R1-43 , Boring sleeve Ø10mm...
1123728 rotating centering t...
201.010.150 Boring bar holder DI...
211.120.150 Rectangular lengthwi...
212.015.157 Boring bar holder DI...
213.105.150 Rectangular transver...
213.125.150 Rectangular lengthwi...
215.140.150 Rectangular tool hol...
221.048.220 Tool holder for carb...
222.060.220 Tool holder for carb...
225.105.150 Rectangular transver...
7.025.178 Drill holder, angula...
7.030.180 Boring bar holder, a...
7.030.341 Boring bar holder, a...
7.030.549 Tool holder, straigh...
7.030.606 Drill holder, angula...
7.040.438 Cut-off tool holder,...
7.074.001 Tool holder, straigh...
7.076.084 Boring bar holder, s...
7.077.286 Boring bar holder, a...
7.077.390 Tool holder, straigh...
7.077.976 Boring bar holder, a...
7.078.083 Tool holder, angular...
7.078.784 Boring bar holder, a...
7.079.486 Blanking plug...
7.171.538 Boring bar holder, a...
1508-1082 DECOFLEX® Adapter 1...
1521-1054 DECOFLEX® Tool Base...
1526-0634 DECOFLEX® Tool Base...
1527-0623 DECOFLEX® Tool Base...
1527-0633 DECOFLEX® Tool Base...
1533-0984 DECOFLEX® Adapter 1...
1533-1087 DECOFLEX® Adapter 1...
2108-0527 DECOFLEX® Adapter 2...
2126-0564 DECOFLEX® Tool Base...
2501-0081 PRECI-FLEX® Adapte...
3204-0007 PRECI-FLEX® Adapte...
3204-0008 PRECI-FLEX® Adapte...
1106158 Drilling and milling...
4.201.214 Drilling and milling...
4.201.240 Drilling and milling...
4.201.300 Drilling and milling...
4.201.552 Drilling and milling...
4.201.720 Drilling and milling...
4.201.782 Drilling and milling...
7.075.010 Drilling and milling...
7.077.740 Drilling and milling...
7.078.307 Drilling and milling...
7.078.312 Drilling and milling...
7.079.450 Drilling and milling...
7.170.125 Drilling and milling...
7.170.126 Drilling and milling...
7.170.855 Drilling and milling...
7.171.990 Drilling and milling...
7.172.130 Drilling and milling...
9.724.115 Drilling and milling...
0T1-91 , Polygon machining un...
1106392 Drilling and milling...
18202 , Front drilling unit ...
2.700.130 Drilling and milling...
221-57-00 , Cross drilling-/mill...
221-66-00 , Cross drilling-/mill...
3.200.330 Drilling and milling...
4.200.087 Drilling and milling...
4.200.328 Drilling and milling...
4.200.620 Drilling and milling...
4.201.710 Drilling and milling...
541-78-00 , Thread whirling unit...
7.070.590 Drilling and milling...
7.077.620 Drilling and milling...
7.077.830 Drilling and milling...
7.077.985 Drilling and milling...
7.079.580 Gear hobbbing unit Ã...
7.079.860 Drilling and milling...
7.170.890 Device for gear mill...
7.172.905 Front drilling unit ...
8.008.051 Milling head, straig...
8.008.141 Milling head, straig...
8.207.163 Milling head, straig...
8.560.025 Drilling and milling...
8.603.003 Drilling and milling...
8.628.115 Drilling and milling...
8.629.209 Drilling and milling...
8.630.xxx Drilling and milling...
8.900.137 Drilling and milling...
9.019.053 Drilling and milling...
9.061.048 Spindle unit for sid...
9.421.041 Drilling and milling...
9.461.059 Spindle unit for sid...
9.508.265 Drilling and milling...
9.610.087 Drilling and milling...
9.660.087 Grinding wheel unit,...
9.660.326 Grinding wheel unit,...
9.698.295 Drilling and milling...
9.704.122 Milling head, angula...
9.806.172 Drilling and milling...
9.807.202 Drilling and milling...
9.902.168 Drilling and milling...
101-02-00 , Drill sleeve ER25 fo...
204.140.150 Morse taper holder, ...
244.310.220 Floating holder, DIN...
3212-0037 Straight Shank Inter...
421-31-00 , double tap sleeve ER...
441-01-00 , Tool holder; shank: ...
571-02-00 , 2-station tool holde...
7.020.012 Adapter, angular, ri...
7.025.156 Boring bar holder, a...
7.030.256 Cut-off tool holder,...
7.030.357 Boring bar holder, a...
7.030.523 Tool holder, straigh...
7.030.539 Drill holder, angula...
7.030.703 Tool holder, angular...
7.040.082 Tool holder, left ha...
7.040.413 Boring bar holder, a...
7.040.480 Boring bar holder, a...
7.040.910 Tool holder, angular...
7.072.664 Boring bar holder, a...
7.073.458 Boring bar holder, a...
7.074.240 Tool holder, straigh...
7.074.295 Drill sleeve DECOFLE...
7.074.590 6-station tool holde...
7.074.650 Double sleeve holder...
7.076.492 Drill holder, angula...
7.077.278 Tool holder, angular...
7.079.996 Tool holder, angular...
7.171.375 Test device...
7.171.535 Tool holder, angular...
7.172.810 Boring bar holder, a...
7.173.625 Adapter...
781-07-00 , Tool holder; shank: ...
1520-0507 DECOFLEX® Adapter 1...
2517-1133 PRECI-FLEX® Adapte...
3203-0341 PRECI-FLEX® Adapte...
3206-0280 PRECI-FLEX® Adapte...
3208-0032 PRECI-FLEX® Adapte...
3214-0365 PRECI-FLEX® Adapte...
3217-1139 PRECI-FLEX® Adapte...
4014-0591 PRECI-FLEX® Adapte...
5005-0483 PRECI-FLEX® Adapte...
3.200.835 Drilling and milling...
4.200.879 Drilling and milling...
4.200.889 Drilling and milling...
4.201.513 Drilling and milling...
4.201.676 Drilling and milling...
7.072.310 Drilling and milling...
7.172.449 Drilling and milling...
9.707.287 Drilling and milling...
2.700.002 Drilling and milling...
2.700.086 Drilling and milling...
3.200.200 Tapping head, straig...
3.200.390 Drilling and milling...
3.200.574 Drilling and milling...
3.200.672 Drilling and milling...
3.201.105 Drilling and milling...
323753 Drilling and milling...
4.200.303 Drilling and milling...
4.200.561 Grinding wheel unit,...
4.200.625 Drilling and milling...
4.201.088 Drilling and milling...
4100.00273 Drilling and milling...
4100.00416 Milling head, straig...
5.200.027 Drilling and milling...
7.070.790 Drilling and milling...
7.071.190 Drilling and milling...
7.170.255 Drilling and milling...
7.171.120 2-Station drilling a...
7.172.200 Thread whirling unit...
8.010.057 Tapping head, straig...
8.011.048 Tapping head, straig...
8.405.248 Drilling and milling...
8.406.125 Drilling and milling...
8.418.130 Milling head, straig...
8.609.095 Drilling and milling...
8.610.056 Tapping head, straig...
8.620.006 Drilling and milling...
8.622.192 Drilling and milling...
8.623.112 Tapping head, straig...
8.803.116 Drilling and milling...
8.805.270 Drilling and milling...
8.816.xxx Drilling and milling...
8.902.136 Drilling and milling...
818489 Drilling and milling...
9.016.xxx Drilling and milling...
9.044.132 Drilling and milling...
9.207.148 Drilling and milling...
9.231.148 Drilling and milling...
9.400.045 Drilling and milling...
9.415.xxx Drilling and milling...
9.463.041 Drilling and milling...
9.484.xxx Drilling and milling...
9.493.xxx Drilling and milling...
9.509.265 Drilling and milling...
9.604.003 Drilling and milling...
9.608.087 Drilling and milling...
9.612.086 Drilling and milling...
9.617.008 Drilling and milling...
9.619.073 Drilling and milling...
9.630.024 Tapping head, angula...
9.634.099 Tapping head, angula...
9.638.056 Drilling and milling...
9.650.032 Milling head, angula...
9.654.004 Drilling and milling...
9.654.208 Drilling and milling...
9.806.189 Drilling and milling...
9.809.171 Drilling and milling...
9.846.285 Drilling and milling...
1062298 Boring bar holder, a...
1125397 Tool holder, angular...
210.500.001 Blanking plug type Z...
211.655.220 Cut-off tool holder,...
212.015.244 Boring bar holder DI...
212.100.250 Rectangular transver...
214.015.245 Boring bar holder DI...
222.010.150 Collet chuck DIN 698...
222.055.250 Tool holder for carb...
222.102.250 Rectangular transver...
224.060.250 Tool holder for carb...
225.100.250 Rectangular transver...
231.107.250 Rectangular transver...
241.105.250 Rectangular transver...
241.202.220 Knurling tool...
327177 Boring bar holder, a...
327250 Boring bar holder, a...
7.030.174 Tool holder, angular...
7.030.285 Boring bar holder, a...
7.030.348 Boring bar holder, a...
7.040.063 Boring bar holder, s...
7.040.164 Tool holder, angular...
7.040.233 Boring bar holder, s...
7.040.344 Tool holder, angular...
7.040.704 Boring bar holder, a...
7.050.012 Tool holder, angular...
7.050.027 Tool holder, angular...
7.070.206 Boring bar holder, a...
7.070.448 Boring bar holder, s...
7.077.090 Boring bar holder, a...
7.078.826 Tool holder, straigh...
775576 Boring bar holder, a...
3205-0281 PRECI-FLEX® Adapte...
3206-0165 PRECI-FLEX® Adapte...
3214-0383 PRECI-FLEX® Adapte...
3217-1135 PRECI-FLEX® Adapte...
3217-1154 PRECI-FLEX® Adapte...
4003-0117 PRECI-FLEX® Adapte...
4008-0248 PRECI-FLEX® Adapte...
4100.00472 Rectangular transver...
4308-0877 PSC Adapter 40
Borin...
4321-0780 PSC Tool Base 40
Tur...
5005-0295 PRECI-FLEX® Adapte...
5321-0764 PSC Tool Base 50
Tur...
6317-0902 PSC Adapter 63
Exten...
6321-0760 PSC Tool Base 63
Tur...
6323-0809 PSC Tool Base 63
Tur...
6330-0857 PSC Tool Base 63
Bor...
6331-0863 PSC Tool Base 63
Bor...
Your Shopping List
| Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX® external and central coolant supply Part Number: 1088818 Also Available 88 Adapter fits on 38 Machines |
| Drilling and milling head angular, left hand - right hand, short collet chuck, ER25A, PRECI-FLEX®, external coolant supply Part Number: 3.200.673 Also Available 88 Adapter fits on 18 Machines |
| Drilling and milling head angular, right hand collet chuck, ER25A, PRECI-FLEX®, Trifix® external coolant supply Part Number: 3.201.108 Also Available 88 Adapter fits on 2 Machines |
| Drilling and milling head angular, double sided collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 4.200.778 Also Available 103 Adapter fits on 2 Machines |
| Drilling and milling head straight collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 4.201.082 Also Available 103 Adapter fits on 8 Machines |
| Drilling and milling head angular, right hand collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 4.201.163 Also Available 103 Adapter fits on Murata-Muratec Muratec MT20 |
| Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 4.201.518 Also Available 103 Adapter fits on Hardinge GS 200/250 MS(Y) (DIN 1809, VDI 40) |
| Drilling and milling head straight collet chuck, ER20A, PRECI-FLEX® external and central coolant supply Part Number: 7.072.605 Also Available 55 Adapter fits on 7 Machines |
| Drilling and milling head straight, short collet chuck, ER50A, PRECI-FLEX®, CC external coolant supply Part Number: 7.073.250 Also Available 34 Adapter fits on 14 Machines |
| Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX®, CC external and central coolant supply Part Number: 7.073.365 Also Available 103 Adapter fits on 44 Machines |
| Drilling and milling head angular, left hand - right hand collet chuck, ER40A, PRECI-FLEX®, external coolant supply Part Number: 7.073.390 Also Available 78 Adapter fits on Okuma LB/LU4000EX |
| Drilling and milling head angular, left hand - right hand collet chuck, ER20A, PRECI-FLEX®, CC external coolant supply Part Number: 7.077.261 Also Available 55 Adapter fits on 4 Machines |
| Drilling and milling head straight collet chuck, ER32A, PRECI-FLEX®, CC external coolant supply Part Number: 7.077.450 Also Available 103 Adapter fits on EMAG VTC200/250 (BMT65) (HP)(*) |
| Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX®, CC external and central coolant supply Part Number: 7.078.432 Also Available 103 Adapter fits on 2 Machines |
| Drilling and milling head straight, left hand offset collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 7.078.525 Also Available 103 Adapter fits on 2 Machines |
| Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX®, CC external coolant supply Part Number: 7.079.595 Also Available 88 Adapter fits on 2 Machines |
| Drilling and milling head straight, left hand-right hand, offset collet chuck, ER25A, PRECI-FLEX® external and central coolant supply Part Number: 7.170.240 Also Available 88 Adapter fits on TSUGAMI M06SY/M08SY |
| Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX®, CC, high pressure external and central coolant supply Part Number: 7.172.572 Also Available 103 Adapter fits on 12 Machines |
| Drilling and milling head straight, right hand offset collet chuck, ER32A, PRECI-FLEX®, high pressure central coolant supply Part Number: 7.172.650 Also Available 103 Adapter fits on 2 Machines |
| Drilling and milling head straight collet chuck, ER40A, PRECI-FLEX® external and central coolant supply Part Number: 8.822.285 Also Available 78 Adapter fits on Okuma LB35II-M (ab Baujahr 06/2001) |
| Cross drilling-/milling unit ER20
Part Number: 101-68-00 fits on Star SR-38 (Type A/B) |
| Drilling and milling head angular collet chuck, ER32, external coolant supply Part Number: 7.072.076 fits on Murata-Muratec Muratec MW20/200GMC |
| Cross drilling-/milling unit DECOFLEX®15
Part Number: 7.074.780 Also Available 181 Adapter fits on 5 Machines |
| 2-spindle cross drilling-/milling unit DECOFLEX®15 with coolant supply (external)
Part Number: 7.076.185 Also Available 181 Adapter fits on 4 Machines |
| Cross drilling-/milling unit ER16 for backworking
Part Number: 7.078.800 fits on 9 Machines |
| 2-spindle cross drilling-/milling unit ER8 with coolant supply (external)
Part Number: 7.171.345 fits on 4 Machines |
| Back drilling unit
DECO-FLEX® 20
Part Number: 7.171.929 Also Available 54 Adapter fits on TSUGAMI BO266/326/385LE/HS327 |
| Boring sleeve Ø10mm for backworking
Part Number: 0R1-43 , fits on 10 Machines |
| rotating centering tip Ø40 Part Number: 1123728 fits on 20 Machines |
| Boring bar holder DIN 69880-E2-20x8 Type E2 external and central coolant supply Part Number: 201.010.150 fits on 20 Machines |
| Rectangular lengthwise tool holder right hand, Type C1 DIN 69880-C1-20x16 Part Number: 211.120.150 fits on 20 Machines |
| Boring bar holder DIN 69880-E2-30x32 Type E2 external and central coolant supply Part Number: 212.015.157 fits on 51 Machines |
| Rectangular transverse tool holder overhead, right hand, short, Type B3 DIN 69880-B3-40x25x44 Part Number: 213.105.150 fits on 44 Machines |
| Rectangular lengthwise tool holder overhead, right hand, Type 32 DIN 69880-32-40x25 Part Number: 213.125.150 fits on 59 Machines |
| Rectangular tool holder with multiple seats overhead, Type D2 DIN 69880-D2-60x32 Part Number: 215.140.150 fits on XXX XXX |
| Tool holder for carbides indexable drill with internal coolant supply Type E1 DIN 69880 E1-20x16, central coolant supply Part Number: 221.048.220 fits on 14 Machines |
| Tool holder for carbides indexable drill Type E1 DIN 69880 E1-30x40, central coolant supply Part Number: 222.060.220 fits on 48 Machines |
| Rectangular transverse tool holder overhead, right hand, long, Type B7 DIN 69880-B7-60x32x60 Part Number: 225.105.150 fits on 2 Machines |
| Drill holder angular, right hand, double sided collet chuck, ER20A, PRECI-FLEX®, Trifix® external and central coolant supply Part Number: 7.025.178 Also Available 55 Adapter fits on Sauter DIN5480 (25) W14x0.8x16 8000 |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø32, external and central coolant supply Part Number: 7.030.180 fits on Okuma LT200-M/LT10-M |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø20, external and central coolant supply Part Number: 7.030.341 fits on 3 Machines |
| Tool holder straight, multiple rectangular lengthwise, external coolant supply Part Number: 7.030.549 fits on 4 Machines |
| Drill holder angular, left hand collet chuck, ER32, external and central coolant supply Part Number: 7.030.606 fits on 2 Machines |
| Cut-off tool holder direction of rotation M3 rectangular transverse, external coolant supply Part Number: 7.040.438 fits on 2 Machines |
| Tool holder straight, multiple rectangular transverse, Coolant external Part Number: 7.074.001 fits on 41 Machines |
| Boring bar holder straight cylindrical chuck Ø40, external and central coolant supply Part Number: 7.076.084 fits on 7 Machines |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø40 external and central coolant supply Part Number: 7.077.286 fits on 3 Machines |
| Tool holder straight, left hand offset rectangular transverse, external coolant supply Part Number: 7.077.390 fits on 20 Machines |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø40 external and central coolant supply Part Number: 7.077.976 fits on Okuma Multus U3000/U4000 |
| Tool holder angular, left hand-right hand rectangular transverse, external coolant supply Part Number: 7.078.083 fits on TSUGAMI M06SY/M08SY |
| Boring bar holder angular, left hand - right hand cylindrical chuck40, external coolant supply Part Number: 7.078.784 fits on 2 Machines |
| Blanking plug Part Number: 7.079.486 fits on 9 Machines |
| Boring bar holder angular, left hand adjustable alignment pin cylindrical chuck Ø32, external and central coolant supply Part Number: 7.171.538 fits on 2 Machines |
| DECOFLEX® Adapter 15
Cylindrical chuck D4
Duemmel R004.0205 DF15-55-00 Part Number: 1508-1082 |
| DECOFLEX® Tool Base 15
Turning Holder
Dieterle LWPH 11-1212-L DF15-47-00 Part Number: 1521-1054 |
| DECOFLEX® Tool Base 15
Grooving Holder UTILIS MULTIDEC®-CUT 3000
3000 DF15x47 L-00 Part Number: 1526-0634 |
| DECOFLEX® Tool Base 15
Grooving Holder Horn Typ 360
L=47 - 00 Part Number: 1527-0623 |
| DECOFLEX® Tool Base 15
Grooving Holder UTILIS MULTIDEC®-CUT 3000
3000 DF15x47 R-00 Part Number: 1527-0633 |
| DECOFLEX® Adapter 15
Cylindrical chuck D6
DIETERLE MFE-06-C DF15-6.7-90 Part Number: 1533-0984 |
| DECOFLEX® Adapter 15
Cylindrical chuck D6
DIETERLE MFE-C-06-06-30-R DF15-4.7-00 Part Number: 1533-1087 |
| DECOFLEX® Adapter 20 Drill Holder D5 - 00 Part Number: 2108-0527 |
| DECOFLEX® Tool Base 20
Grooving Holder
NSRHDX DF20-48-00 Part Number: 2126-0564 |
| PRECI-FLEX® Adapter 25 Collet Chuck Standard DIN6499 UM/ER25 (430E) Part Number: 2501-0081 |
| PRECI-FLEX® Adapter 32 Weldon extended DIN1835-B8 Part Number: 3204-0007 |
| PRECI-FLEX® Adapter 32 Weldon extended DIN1835-B10 Part Number: 3204-0008 |
| Drilling and milling head straight, left hand-right hand, offset collet chuck, ER20A, PRECI-FLEX®, CC external and central coolant supply Part Number: 1106158 Also Available 55 Adapter fits on 3 Machines |
| Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX®, external and central coolant supply Part Number: 4.201.214 Also Available 103 Adapter fits on 2 Machines |
| Drilling and milling head angular, left hand, short collet chuck, ER32A, PRECI-FLEX®, external and central coolant supply Part Number: 4.201.240 Also Available 103 Adapter fits on 2 Machines |
| Drilling and milling head straight, double collet chuck, ER25A, PRECI-FLEX® external coolant supply Part Number: 4.201.300 Also Available 88 Adapter fits on Okuma LT300-M/LT15-M/LB300-MYW (neu) |
| Drilling and milling head angular, right hand collet chuck, ER32A, PRECI-FLEX®, Trifix® external coolant supply Part Number: 4.201.552 Also Available 103 Adapter fits on 3 Machines |
| Drilling and milling head angular 55°, left hand collet chuck, ER32A, PRECI-FLEX®, Trifix® external and central coolant supply Part Number: 4.201.720 Also Available 103 Adapter fits on DMG MORI CTX beta 500/800/1250 (Sternrev.) |
| Drilling and milling head angular 70°, left hand collet chuck, ER25A, PRECI-FLEX®, external and central coolant supply, high pressure Part Number: 4.201.782 Also Available 88 Adapter fits on 3 Machines |
| Drilling and milling head straight, left hand-right hand, offset collet chuck, ER25A, PRECI-FLEX®, external coolant supply Part Number: 7.075.010 Also Available 88 Adapter fits on 2 Machines |
| Drilling and milling head angular, left hand-right hand collet chuck, ER25A, PRECI-FLEX®, CC external coolant supply Part Number: 7.077.740 Also Available 88 Adapter fits on 8 Machines |
| Drilling and milling head angular collet chuck, ER32A, PRECI-FLEX®, external and central coolant supply Part Number: 7.078.307 Also Available 103 Adapter fits on 6 Machines |
| Drilling and milling head straight collet chuck, ER32A, PRECI-FLEX®, CC central coolant supply Part Number: 7.078.312 Also Available 103 Adapter fits on 6 Machines |
| Drilling and milling head straight, double, adjustable alignment pin collet chuck, ER25A, PRECI-FLEX® external and central coolant supply Part Number: 7.079.450 Also Available 88 Adapter fits on Mazak QTN 300/350/400/450 MSY (II) |
| Drilling and milling head angular 85°, left hand-right hand collet chuck, ER20A, PRECI-FLEX® external coolant supply Part Number: 7.170.125 Also Available 55 Adapter fits on TSUGAMI M06SY/M08SY |
| Drilling and milling head angular, left hand - right hand, short collet chuck, ER25A, PRECI-FLEX®, external coolant supply Part Number: 7.170.126 Also Available 88 Adapter fits on TSUGAMI M06SY/M08SY |
| Drilling and milling head angular, left hand-right hand, short collet chuck, ER25A, PRECI-FLEX®, CC external coolant supply Part Number: 7.170.855 Also Available 88 Adapter fits on 6 Machines |
| Drilling and milling head straight, left hand-right hand, offset collet chuck, ER25A, PRECI-FLEX®, external coolant supply Part Number: 7.171.990 Also Available 88 Adapter fits on TSUGAMI M50SYE |
| Drilling and milling head straight, left hand-right hand, offset collet chuck, ER32A, PRECI-FLEX®, CC external coolant supply Part Number: 7.172.130 Also Available 103 Adapter fits on EMAG VT4/VT200 VTC200/250 (BMT65) (*) |
| Drilling and milling head angular, left hand collet chuck, ER32A, PRECI-FLEX®, external and central coolant supply Part Number: 9.724.115 Also Available 103 Adapter fits on Sauter DIN5482 B17x14 (40) |
| Polygon machining unit Ø60xØ13mm
Part Number: 0T1-91 , fits on 6 Machines |
| Drilling and milling head angular 15°, right and left hand HSK50-C Mapal, CC external and central coolant supply Part Number: 1106392 fits on Sauter DIN5480 (40) W20x0.8x24 10000 |
| Front drilling unit Ø10mm for deep drilling; 18000 1/min; with coolant supply (internal)
Part Number: 18202 , fits on 0 Machines |
| Drilling and milling head straight, angular adjustable collet chuck, ER16A, external coolant supply Part Number: 2.700.130 fits on Weiler DZ35/DZ45-H/DZ65 (VDI25) |
| Cross drilling-/milling unit ER11; adjustable in height
Part Number: 221-57-00 , fits on Star SV-32JII |
| Cross drilling-/milling unit ER16
Part Number: 221-66-00 , fits on Star SV-32JII |
| Drilling and milling head straight, right hand offset collet chuck, ER25A, external coolant supply Part Number: 3.200.330 fits on 2 Machines |
| Drilling and milling head straight, left hand offset, double sided collet chuck, ER32A, external coolant supply Part Number: 4.200.087 fits on Okuma LB15-MW |
| Drilling and milling head straight collet chuck, ER40A, external coolant supply Part Number: 4.200.328 fits on Okuma LR25-M |
| Drilling and milling head straight, left hand-right hand, offset, X-axis 11° collet chuck, ER32A, external coolant supply Part Number: 4.200.620 fits on 2 Machines |
| Drilling and milling head angular 30°, left hand quick change, EPPINGER PSC 40 external and central coolant supply Part Number: 4.201.710 fits on 2 Machines |
| Thread whirling unit; ajustable (0°±10°)
Part Number: 541-78-00 , fits on 2 Machines |
| Drilling and milling head straight collet chuck, ER11 Part Number: 7.070.590 fits on Citizen M12/M16 |
| Drilling and milling head straight, angular, left hand - right hand quick change, EPPINGER PSC 40, CC external coolant supply Part Number: 7.077.620 fits on 34 Machines |
| Drilling and milling head straight, right hand offset adjustable alignment pin quick change, EPPINGER PSC 40 external and central coolant supply Part Number: 7.077.830 fits on 4 Machines |
| Drilling and milling head straight, double, Y offset collet chuck, ER16A, CC external coolant supply Part Number: 7.077.985 fits on 17 Machines |
| Gear hobbbing unit Ø3,5mm and Ø4,5mm (+7° to -4°)
Part Number: 7.079.580 fits on Star SW-12RII |
| Drilling and milling head angular 54° quick change, HSK40, CC external coolant supply Part Number: 7.079.860 fits on 7 Machines |
| Device for gear milling
chuck for cutter arbor Ø16 angle adjustable ±20° Part Number: 7.170.890 fits on 4 Machines |
| Front drilling unit for deep drilling DECOFLEX®15 for backworking with coolant supply (external or internal)
Part Number: 7.172.905 Also Available 181 Adapter fits on 3 Machines |
| Milling head straight, short chuck for cutter arbor Ø16, external coolant supply Part Number: 8.008.051 fits on 2 Machines |
| Milling head straight, short chuck for cutter arbor Ø16, external coolant supply Part Number: 8.008.141 fits on 4 Machines |
| Milling head straight, short chuck for cutter arbor Ø16, external coolant supply Part Number: 8.207.163 fits on Bumotec S188 |
| Drilling and milling head angular adjustable, left hand collet chuck, ER16A, external coolant supply Part Number: 8.560.025 fits on Duplomatic DIN 1809 (30) PIN40 |
| Drilling and milling head straight,short collet chuck, ER25, external coolant supply Part Number: 8.603.003 fits on DMG MORI GDM200 (40) |
| Drilling and milling head straight, right hand offset collet chuck, ER32, external and central coolant supply Part Number: 8.628.115 fits on 4 Machines |
| Drilling and milling head straight, left hand offset collet chuck, ER32, external coolant supply Part Number: 8.629.209 fits on 3 Machines |
| Drilling and milling head straight, right hand offset collet chuck, ER32, external coolant supply Part Number: 8.630.xxx fits on XXX XXX |
| Drilling and milling head straight collet chuck, ER50, external coolant supply Part Number: 8.900.137 fits on Sauter DIN5482 B25x22 (60) |
| Drilling and milling head angular, right hand, short collet chuck, ER16, external coolant supply Part Number: 9.019.053 fits on 2 Machines |
| Spindle unit for side milling cutters angular, right hand chuck for cutter arbor Ø16, external coolant supply Part Number: 9.061.048 fits on 2 Machines |
| Drilling and milling head angular, right hand, short collet chuck, ER11, external coolant supply Part Number: 9.421.041 fits on 4 Machines |
| Spindle unit for side milling cutters angular, right hand chuck for cutter arbor Ø16, external coolant supply Part Number: 9.461.059 fits on 3 Machines |
| Drilling and milling head angular, left hand, short collet chuck, ER25A, external and central coolant supply Part Number: 9.508.265 fits on 2 Machines |
| Drilling and milling head angular, left hand collet chuck, ER25, external coolant supply Part Number: 9.610.087 fits on 2 Machines |
| Grinding wheel unit angular, left hand-right hand chuck for cutter arbor Ø20 external coolant supply Part Number: 9.660.087 fits on 2 Machines |
| Grinding wheel unit angular, left hand-right hand chuck for cutter arbor Ø20 external coolant supply Part Number: 9.660.326 fits on Baruffaldi TOEM/TBMA 200/12 (40) |
| Drilling and milling head angular, left hand, short collet chuck, ER32A, external coolant supply Part Number: 9.698.295 fits on Haas SL/ST40 (130,25 mm) |
| Milling head angular, left hand, short chuck for cutter arbor Ø27, central coolant supply Part Number: 9.704.122 fits on 3 Machines |
| Drilling and milling head angular, left hand collet chuck, ER40, external coolant supply Part Number: 9.806.172 fits on Duplomatic DIN 1809 (50) |
| Drilling and milling head angular, right hand collet chuck, ER40, external coolant supply Part Number: 9.807.202 fits on Daewoo Puma 350 (alt) |
| Drilling and milling head angular, left hand, short collet chuck, ER50, external and central coolant supply Part Number: 9.902.168 fits on Duplomatic DIN 1809 (60) |
| Drill sleeve ER25 for backworking
Part Number: 101-02-00 , fits on 3 Machines |
| Morse taper holder Type F DIN 69880-F50-MK-DK4 Part Number: 204.140.150 fits on 24 Machines |
| Floating holder DIN 69880 central coolant supply Part Number: 244.310.220 fits on 7 Machines |
| Straight Shank Interface D40 PRECI-FLEX® 32 Part Number: 3212-0037 Also Available 103 Adapter fits on 0 Machines |
| double tap sleeve ER16; shank: Ø32mm; for front- and backworking
Part Number: 421-31-00 , fits on 4 Machines |
| Tool holder; shank: 16x16mm
Part Number: 441-01-00 , fits on Star SV-32JII |
| 2-station tool holder; shank: 16x16mm
Part Number: 571-02-00 , fits on Star ECAS-12/20 |
| Adapter angular, right hand for VDI-shank Ø20 Part Number: 7.020.012 fits on 2 Machines |
| Boring bar holder angular, left hand - right hand, multiple cylindrical chuck Ø20, external and central coolant supply Part Number: 7.025.156 fits on 2 Machines |
| Cut-off tool holder direction of rotation M3 rectangular transverse, external coolant supply Part Number: 7.030.256 fits on Okuma LT200-M/LT10-M |
| Boring bar holder angular, right hand, short cylindrical chuck Ø32, external and central coolant supply Part Number: 7.030.357 fits on 2 Machines |
| Tool holder straight, right hand offset rectangular transverse, external coolant supply Part Number: 7.030.523 fits on 4 Machines |
| Drill holder angular, left hand collet chuck, ER32, external and central coolant supply Part Number: 7.030.539 fits on 2 Machines |
| Tool holder angular, right hand quick change, EPPINGER PSC 40, LH external and central coolant supply Part Number: 7.030.703 fits on 4 Machines |
| Tool holder left hand, back turret operation, multiple rectangular transverse and cylindrical chuck, external coolant supply Part Number: 7.040.082 fits on 2 Machines |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø40, external coolant supply Part Number: 7.040.413 fits on 3 Machines |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø40 external and central coolant supply Part Number: 7.040.480 fits on 10 Machines |
| Tool holder angular, left hand quick change, EPPINGER PSC 40, RH external and central coolant supply Part Number: 7.040.910 fits on 5 Machines |
| Boring bar holder angular, left hand - right hand, short cylindrical chuck Ø40, external and central coolant supply Part Number: 7.072.664 fits on 6 Machines |
| Boring bar holder angular, left hand - right hand, multiple cylindrical chuck Ø25, external coolant supply Part Number: 7.073.458 fits on 6 Machines |
| Tool holder straight, short rectangular transverse, external coolant supply Part Number: 7.074.240 fits on Hardinge Quest 65, SR + RS Reihe (ESA-Rev.) |
| Drill sleeve DECOFLEX®15; shank: Ø32mm
Part Number: 7.074.295 Also Available 181 Adapter fits on 4 Machines |
| 6-station tool holder; shank: 10x10mm
Part Number: 7.074.590 fits on Star SR-10J |
| Double sleeve holder Ø25mm for high speed spindle
Part Number: 7.074.650 fits on 9 Machines |
| Drill holder angular, left hand-right hand quick change, HSK 50-T external and central coolant supply Part Number: 7.076.492 fits on 39 Machines |
| Tool holder angular quick change, EPPINGER PSC 40, LH external and central coolant supply Part Number: 7.077.278 fits on 11 Machines |
| Tool holder angular, straight quick change, EPPINGER PSC 40, LH external and central coolant supply Part Number: 7.079.996 fits on 5 Machines |
| Test device Part Number: 7.171.375 fits on 5 Machines |
| Tool holder angular adjustable alignment pin quick change, EPPINGER PSC 40, LH external and central coolant supply Part Number: 7.171.535 fits on 2 Machines |
| Boring bar holder angular, left hand - right hand offset, cylindrical chuck Ø32, external and central coolant supply Part Number: 7.172.810 fits on 37 Machines |
| Adapter Part Number: 7.173.625 fits on 28 Machines |
| Tool holder; shank: 16x16mm; for inverse turning direction
Part Number: 781-07-00 , fits on Star SV-32 |
| DECOFLEX® Adapter 15
Turning Tool Holder for Square 12x12 Part Number: 1520-0507 |
| PRECI-FLEX® Adapter 25
ISCAR Multi-Master T12 L=32.5 Part Number: 2517-1133 |
| PRECI-FLEX® Adapter 32 Weldon short Standard DIN1835-B16 with coolant channel Part Number: 3203-0341 |
| PRECI-FLEX® Adapter 32 Whistle Notch extended DIN1835-E25 Part Number: 3206-0280 |
| PRECI-FLEX® Adapter 32 Boring Bar Holder D20 Part Number: 3208-0032 |
| PRECI-FLEX® Adapter 32 Shrink Fit D16 Part Number: 3214-0365 |
| PRECI-FLEX® Adapter 32
ISCAR Multi-Master T10 L=37.5 Part Number: 3217-1139 |
| PRECI-FLEX® Adapter 40 Shrink Fit D6 Part Number: 4014-0591 |
| PRECI-FLEX® Adapter 50 Whistle Notch short Standard DIN1835-E12 Part Number: 5005-0483 |
| Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX® external coolant supply Part Number: 3.200.835 Also Available 88 Adapter fits on 0 Machines |
| Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 4.200.879 Also Available 103 Adapter fits on Traub TNX65 (40) |
| Drilling and milling head angular, left hand - right hand collet chuck, ER32A, PRECI-FLEX® external and central coolant supply Part Number: 4.200.889 Also Available 103 Adapter fits on Traub TNX65 (40) |
| Drilling and milling head angular, left hand collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 4.201.513 Also Available 103 Adapter fits on Haas Hybrid VB24-ST/DS 20-30 SSY (117,55 mm) |
| Drilling and milling head straight collet chuck, ER32A, PRECI-FLEX® external and central coolant supply Part Number: 4.201.676 Also Available 103 Adapter fits on Haas Hybrid VB24-ST/DS 20-30 SSY (117,55 mm) |
| Drilling and milling head angular, left hand - right hand collet chuck, ER25A, PRECI-FLEX® external coolant supply Part Number: 7.072.310 Also Available 88 Adapter fits on BMT BMT55 * |
| Drilling and milling head angular, left hand - right hand, short collet chuck, ER32A, PRECI-FLEX® external coolant supply Part Number: 7.172.449 Also Available 103 Adapter fits on Okuma LB/LU4000EX |
| Drilling and milling head angular, right hand, short collet chuck, ER32A, PRECI-FLEX®, external coolant supply Part Number: 9.707.287 Also Available 103 Adapter fits on Okuma LVT400-M |
| Drilling and milling head straight collet chuck, ER20A, external and central coolant supply Part Number: 2.700.002 fits on 5 Machines |
| Drilling and milling head angular, left hand - right hand collet chuck, ER20A, external coolant supply Part Number: 2.700.086 fits on 6 Machines |
| Tapping head straight, right hand offset, tension compensation collet chuck, ER20A, external coolant supply Part Number: 3.200.200 fits on 2 Machines |
| Drilling and milling head straight, angular adjustable collet chuck, ER16A, external coolant supply Part Number: 3.200.390 fits on 6 Machines |
| Drilling and milling head angular, right hand collet chuck, ER20, external coolant supply Part Number: 3.200.574 fits on DMG MORI ZT1000/ZT1500 |
| Drilling and milling head angular, left hand - right hand, short collet chuck, ER25A, external coolant supply Part Number: 3.200.672 fits on 2 Machines |
| Drilling and milling head straight, angular adjustable collet chuck, ER20A, external coolant supply Part Number: 3.201.105 fits on 6 Machines |
| Drilling and milling head angular, right hand collet chuck, ER20, external coolant supply Part Number: 323753 fits on Traub TNA300 |
| Drilling and milling head straight, left hand offset collet chuck, ER32A, external coolant supply Part Number: 4.200.303 fits on 2 Machines |
| Grinding wheel unit angular, left hand-right hand chuck for cutter arbor Ø20 external coolant supply Part Number: 4.200.561 fits on Okuma LR/LB15-M |
| Drilling and milling head straight collet chuck, ER40A , central coolant supply Part Number: 4.200.625 fits on Okuma LU25-M (Flat Turning) |
| Drilling and milling head angular, right hand collet chuck, ER32A, external coolant supply Part Number: 4.201.088 fits on Okuma LVT300-M |
| Drilling and milling head straight, left hand offset collet chuck, ER16M external coolant supply Part Number: 4100.00273 fits on 3 Machines |
| Milling head straight, left hand offset chuck for cutter arbor Ø16, external coolant supply Part Number: 4100.00416 fits on Schaublin CNC330 |
| Drilling and milling head straight quick change, WIDAFLEX WDX40, external and central coolant supply Part Number: 5.200.027 fits on Traub TNA500/600/700 (50) |
| Drilling and milling head straight, angular adjustable collet chuck, ER20A, external coolant supply Part Number: 7.070.790 fits on Murata-Muratec Muratec MT12/200 |
| Drilling and milling head angular, right hand cylindrical chuck DIN 1835, Ø25H5, external coolant supply Part Number: 7.071.190 fits on DMG MORI ZT2500 FBT |
| Drilling and milling head angular 48.65° quick change, HSK40 external coolant supply Part Number: 7.170.255 fits on Bergomat - |
| 2-Station drilling and milling head angular DECOFLEX® 20 Part Number: 7.171.120 Also Available 54 Adapter fits on Tornos SwissDECO |
| Thread whirling unit outer
adjustable 0°±25°
external coolant supply Part Number: 7.172.200 fits on Tornos SwissDECO |
| Tapping head straight, short, tension compensation collet chuck, NG8, external coolant supply Part Number: 8.010.057 fits on Duplomatic DIN 1809 (20) |
| Tapping head straight, short, tension compensation collet chuck, ER11, external coolant supply Part Number: 8.011.048 fits on 2 Machines |
| Drilling and milling head straight collet chuck, ER20 , external coolant supply Part Number: 8.405.248 fits on Hitachi Seiki HT20R/HT23R (30) |
| Drilling and milling head straight collet chuck, ER25 , external and central coolant supply Part Number: 8.406.125 fits on 3 Machines |
| Milling head straight, short chuck for cutter arbor Ø22, external coolant supply Part Number: 8.418.130 fits on Okuma LT200-M/LT10-M |
| Drilling and milling head straight collet chuck, ER32A, external and central coolant supply Part Number: 8.609.095 fits on Okuma LR/LB15-M |
| Tapping head straight, short, tension compensation collet chuck, NG12, external coolant supply Part Number: 8.610.056 fits on DMG MORI GDM42-65-90 |
| Drilling and milling head straight cylindrical chuck DIN 1835, Ø16H5, external and central coolant supply Part Number: 8.620.006 fits on Okuma LR/LB15-M |
| Drilling and milling head straight collet chuck, ER32 , external and central coolant supply Part Number: 8.622.192 fits on Baruffaldi TOEM/TBMA 200/12 (40) |
| Tapping head straight, tension compensation PCM collet chuck, ER32, external coolant supply Part Number: 8.623.112 fits on 10 Machines |
| Drilling and milling head straight collet chuck, ER40 , external coolant supply Part Number: 8.803.116 fits on Okuma LU35-M |
| Drilling and milling head straight,short collet chuck, ER40, external coolant supply Part Number: 8.805.270 fits on Baruffaldi TOEM/TBMA 250/12 (50) |
| Drilling and milling head straight cylindrical chuck DIN 1835, Ø20H5, external and central coolant supply Part Number: 8.816.xxx fits on XXX XXX |
| Drilling and milling head straight quick change, PSC 50, central coolant supply Part Number: 8.902.136 fits on Okuma LB/LU45-M |
| Drilling and milling head straight, left hand offset, multiple collet chuck, ER16, external coolant supply Part Number: 818489 fits on Traub TNM28 |
| Drilling and milling head angular, left hand, short collet chuck, ER10, external coolant supply Part Number: 9.016.xxx fits on XXX XXX |
| Drilling and milling head angular, left hand, short collet chuck, ER20A, external coolant supply Part Number: 9.044.132 fits on Sauter DIN5480 W10x0,8x30 (20) |
| Drilling and milling head angular, right hand collet chuck, ER11, external coolant supply Part Number: 9.207.148 fits on Schaublin CNC330 |
| Drilling and milling head angular, right hand, short collet chuck, ER16, external coolant supply Part Number: 9.231.148 fits on Schaublin CNC330 |
| Drilling and milling head angular, left hand collet chuck, NG12, external coolant supply Part Number: 9.400.045 fits on DMG MORI GAC42-65 |
| Drilling and milling head angular, right hand, short collet chuck, ER8, external coolant supply Part Number: 9.415.xxx fits on XXX XXX |
| Drilling and milling head angular, right hand collet chuck, ER25, external coolant supply Part Number: 9.463.041 fits on Duplomatic DIN 1809 (30) PIN40 |
| Drilling and milling head angular, left hand, short collet chuck, ER25, external coolant supply Part Number: 9.484.xxx fits on XXX XXX |
| Drilling and milling head angular, right hand cylindrical chuck DIN 1835, Ø10H5, external and central coolant supply Part Number: 9.493.xxx fits on XXX XXX |
| Drilling and milling head angular, right hand, short collet chuck, ER25A, external and central coolant supply Part Number: 9.509.265 fits on 4 Machines |
| Drilling and milling head angular, left hand collet chuck, NG16, external coolant supply Part Number: 9.604.003 fits on DMG MORI GDM200 (40) |
| Drilling and milling head angular, left hand collet chuck, ER11, external coolant supply Part Number: 9.608.087 fits on 2 Machines |
| Drilling and milling head angular, left hand, short collet chuck, NG16, external coolant supply Part Number: 9.612.086 fits on 2 Machines |
| Drilling and milling head angular, right hand, short collet chuck, NG16, external coolant supply Part Number: 9.617.008 fits on Sauter DIN5482 B17x14 (40) |
| Drilling and milling head angular, right hand, short collet chuck, ER25, external coolant supply Part Number: 9.619.073 fits on Duplomatic M 16.5° (40) |
| Tapping head angular, left hand, tension compensation collet chuck, ER20, external coolant supply Part Number: 9.630.024 fits on Sauter DIN5482 B17x14 (40) |
| Tapping head angular, left hand, short, tension compensation with collet chuck, ER20, external coolant supply Part Number: 9.634.099 fits on Okuma LB/LU400-M/LB/LU25-M/LB4000 (VDI) |
| Drilling and milling head angular, left hand collet chuck, ER25A, external coolant supply Part Number: 9.638.056 fits on DMG MORI GDM42-65-90 |
| Milling head angular, left hand chuck for cutter arbor Ø22, coolant external Part Number: 9.650.032 fits on Okuma LR25-M |
| Drilling and milling head angular, left hand collet chuck, ER32, external coolant supply Part Number: 9.654.004 fits on Duplomatic DIN 1809 (40) PIN63 |
| Drilling and milling head angular, left hand collet chuck, ER32, external coolant supply Part Number: 9.654.208 fits on Hitachi Seiki Hicell 23S (40) |
| Drilling and milling head angular, left hand collet chuck, ER40, external coolant supply Part Number: 9.806.189 fits on Duplomatic I (50) Pin-Abst. 43 |
| Drilling and milling head angular, right hand collet chuck, ER40 , external and central coolant supply Part Number: 9.809.171 fits on Duplomatic I (50) Pin-Abst. 63 |
| Drilling and milling head angular, left hand, short collet chuck, ER40A, external and central coolant supply Part Number: 9.846.285 fits on Okuma LB35II-M (ab Baujahr 06/2001) |
| Boring bar holder angular, right hand, short cylindrical chuck Ø25,4 (1"), external and central coolant supply Part Number: 1062298 fits on DMG MORI MF Sprint 65 (alt) |
| Tool holder angular, left hand, QUICK-LOCK BMT® rectangular transverse, external and central coolant supply Part Number: 1125397 fits on QUICK-LOCK BMT® 60 (A) |
| Blanking plug type Z2
DIN 69880-Z2-16 (plastic) Part Number: 210.500.001 fits on XXX XXX |
| Cut-off tool holder direction of rotation M3 external coolant supply Tool height H=26 Part Number: 211.655.220 fits on 7 Machines |
| Boring bar holder DIN 69880 Type E2 for inch tools external and central coolant supply Part Number: 212.015.244 fits on 21 Machines |
| Rectangular transverse tool holder right hand, short, Type B1 for inch tools external coolant supply Part Number: 212.100.250 fits on 15 Machines |
| Boring bar holder DIN 69880 Type E2 for inch tools external and central coolant supply Part Number: 214.015.245 fits on 8 Machines |
| Collet chuck DIN 69880-E3-30x25 Type E3 for collets DIN 6388 Ortlieb Part Number: 222.010.150 fits on 28 Machines |
| Tool holder for carbides indexable drill Type E1 for inch tools DIN 69880, central coolant supply Part Number: 222.055.250 fits on 22 Machines |
| Rectangular transverse tool holder right hand, long, Type B5 for inch tools external coolant supply Part Number: 222.102.250 fits on 13 Machines |
| Tool holder for carbides indexable drill Type E1 for inch tools DIN 69880, central coolant supply Part Number: 224.060.250 fits on 7 Machines |
| Rectangular transverse tool holder right hand, long, Type B5 for inch tools external coolant supply Part Number: 225.100.250 fits on 2 Machines |
| Rectangular transverse tool holder overhead, right hand, short,Type B3 for inch tools exteral coolant supply Part Number: 231.107.250 fits on 8 Machines |
| Rectangular transverse tool holder overhead, right hand, long,Type B7 for inch tools external coolant supply Part Number: 241.105.250 fits on 3 Machines |
| Knurling tool Part Number: 241.202.220 fits on XXX XXX |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø32, external coolant supply Part Number: 327177 fits on Traub TND200 |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø20, central coolant supply Part Number: 327250 fits on Traub TND200 |
| Tool holder angular, right hand, short rectangular transverse, external coolant supply Part Number: 7.030.174 fits on Monarch (VDI30) |
| Boring bar holder angular, right hand, short cylindrical chuck Ø19,05 (3/4"), external and central coolant supply Part Number: 7.030.285 fits on DMG MORI MF Sprint 65 (alt) |
| Boring bar holder angular, left hand-right hand cylindrical chuck Ø25,4 (1"), external and central coolant supply Part Number: 7.030.348 fits on 2 Machines |
| Boring bar holder straight cylindrical chuck Ø40, central coolant supply Part Number: 7.040.063 fits on XXX XXX |
| Tool holder angular, left hand-right hand rectangular transverse, external coolant supply Part Number: 7.040.164 fits on XXX XXX |
| Boring bar holder straight, left hand offset, back turret operation, multiple cylindrical chuck Ø19,05 (3/4"), external coolant supply Part Number: 7.040.233 fits on Okuma LB15-MW |
| Tool holder angular, left hand-right hand, short morse taper holder MK4, external and central coolant supply Part Number: 7.040.344 fits on Okuma LT300-M/LT15-M/LB300-MYW (neu) |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø38,1 (1 1/2"), external and central coolant supply Part Number: 7.040.704 fits on Okuma MacTurn 550 |
| Tool holder angular, right hand - overhead, long rectangular transverse, internal coolant supply Part Number: 7.050.012 fits on XXX XXX |
| Tool holder angular, right hand quick change, PSC 40,external and central coolant supply Part Number: 7.050.027 fits on Duplomatic DIN 1809 (50) |
| Boring bar holder angular, left hand cylindrical chuck Ø38,1 (1 1/2"), external and central coolant supply Part Number: 7.070.206 fits on Biglia B501/B1000 |
| Boring bar holder straight cylindrical chuck Ø50, external and central coolant supply Part Number: 7.070.448 fits on Okuma MacTurn 50 (MAS-BT50) (Old Version) |
| Boring bar holder angular, left hand cylindrical chuck Ø63,5 (2 1/2"), external and central coolant supply Part Number: 7.077.090 fits on SMEC PL 800V (R/L) (BMT75) |
| Tool holder straight, right hand offset rectangular transverse 25,4 (1"), external coolant supply Part Number: 7.078.826 fits on 4 Machines |
| Boring bar holder angular, left hand - right hand cylindrical chuck Ø32, central coolant supply Part Number: 775576 fits on Traub TNC42/65 |
| PRECI-FLEX® Adapter 32 Whistle Notch short Standard DIN1835-E14 Part Number: 3205-0281 |
| PRECI-FLEX® Adapter 32 Whistle Notch extended DIN1835-E1/2" Part Number: 3206-0165 |
| PRECI-FLEX® Adapter 32 Shrink Fit D3/8" Part Number: 3214-0383 |
| PRECI-FLEX® Adapter 32
ISCAR Multi-Master T08 L=19.5 Part Number: 3217-1135 |
| PRECI-FLEX® Adapter 32
ISCAR Multi-Master T06 L=50.5 Part Number: 3217-1154 |
| PRECI-FLEX® Adapter 40 Weldon short Standard DIN1835-B1/2" Part Number: 4003-0117 |
| PRECI-FLEX® Adapter 40 Boring Bar Holder D1" Part Number: 4008-0248 |
| Rectangular transverse tool holder left hand, height adjustable, overhead DIN 69880, external coolant supply Part Number: 4100.00472 fits on Schaublin CNC330 |
| PSC Adapter 40
Boring Bar Holder D20 Part Number: 4308-0877 |
| PSC Tool Base 40
Turning Holder
PSC40-SDUCL-27050-11
Part Number: 4321-0780 |
| PRECI-FLEX® Adapter 50 Whistle Notch short Standard DIN1835-E3/4" Part Number: 5005-0295 |
| PSC Tool Base 50
Turning Holder
PSC50-SVPBL-35060-16
Part Number: 5321-0764 |
| PSC Adapter 63
Extension L=60 Part Number: 6317-0902 |
| PSC Tool Base 63
Turning Holder
PSC63-SVJBL-45065-16
Part Number: 6321-0760 |
| PSC Tool Base 63
Turning Holder
PSC63-SCMCN-00100-12
Part Number: 6323-0809 |
| PSC Tool Base 63
Boring Bar
PSC63-SDQCL-22160-11
Part Number: 6330-0857 |
| PSC Tool Base 63
Boring Bar
PSC63-SDQCR-27180-11
Part Number: 6331-0863 |
Copyright 2025 EPPINGER USA | Home
| Who we are